資料載入中.....
|
請使用永久網址來引用或連結此文件:
https://irlib.pccu.edu.tw/handle/987654321/26738
|
| 題名: | Ultrahigh molecular weight polyethylene fibers prepared using conical dies with varying dimensions |
| 作者: | Yeh, JT (Yeh, Jen-Taut)
Wang, CK (Wang, Chuen-Kai)[
Zhou, Q (Zhou, Qin)
Zhou, HP (Zhou, Huo-Peng)
Tsai, CC (Tsai, Chih-Chen)
Lai, YC (Lai, Yu-Ching)
Tsou, CH (Tsou, Chi-Hui)
Chen, KN (Chen, Kan-Nan)
Huang, CY (Huang, Chi-Yuan)
Lee, KC (Lee, Kuei-Chi) |
| 貢獻者: | Dept Text Engn |
| 關鍵詞: | ULTRADRAWING GEL FILMS
CARBON NANOTUBE FIBERS
FORMATION TEMPERATURES
GELATION CRYSTALLIZATION
MECHANICAL-PROPERTIES
DRAWING CONDITIONS
ALTERNATIVE ROUTE
EXTRUDATE SWELL
BLENDS
BEHAVIOR |
| 日期: | 2013-09 |
| 上傳時間: | 2014-02-24 16:44:07 (UTC+8) |
| 摘要: | Dimensions of conical dies were found to have a significant influence on thermal, morphological, orientation, ultradrawing, and dynamic mechanical properties of the as-prepared and/or drawn ultrahigh molecular weight polyethylene (UHMWPE) fiber specimens prepared in this study. Many demarcated micro-fibrils were found paralleling to fiber direction of the as-prepared UHMWPE fiber specimens. The percentage crystallinity, melting temperatures, orientation factor (f(o)) and achievable draw ratio (D-ra) values of each as-prepared UHMWPE fiber specimen prepared at a fixed length of outlet land reach a maximum value, as the entry angles of the conical die approach the optimum value at 75 degrees. The maximum f(o) and D-ra values obtained for each F-20(75-y) as-prepared fiber series specimens prepared using the optimum entry angle reach another maximum value as their length of outlet land approach the optimum value of 6.5 mm. The ultimate tensile strengths and moduli of the drawn UHMWPE fibers prepared at the optimum entry angle and length of outlet land are significantly higher than those of fibers prepared at other conditions but stretched to the same draw ratio. Possible reasons accounting for the above interesting properties were discussed in this study. POLYM. ENG. SCI., 2013. (c) 2013 Society of Plastics Engineers |
| 關聯: | POLYMER ENGINEERING AND SCIENCE Volume: 53 Issue: 9 Pages: 1910-1919 |
| 顯示於類別: | [紡織工程學系] 期刊論文
|
文件中的檔案:
| 檔案 |
描述 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | | 0Kb | HTML | 494 | 檢視/開啟 |
|
在CCUR中所有的資料項目都受到原著作權保護.
|
