Ultrahigh molecular weight polyethylene fibers prepared using conical dies with varying dimensions

CCUR > College of Natural Science and Engineering > College of Engineering > Department of Textile Engineering > journal articles > Item 987654321/26738

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/26738

Title:	Ultrahigh molecular weight polyethylene fibers prepared using conical dies with varying dimensions
Authors:	Yeh, JT (Yeh, Jen-Taut) Wang, CK (Wang, Chuen-Kai)[ Zhou, Q (Zhou, Qin) Zhou, HP (Zhou, Huo-Peng) Tsai, CC (Tsai, Chih-Chen) Lai, YC (Lai, Yu-Ching) Tsou, CH (Tsou, Chi-Hui) Chen, KN (Chen, Kan-Nan) Huang, CY (Huang, Chi-Yuan) Lee, KC (Lee, Kuei-Chi)
Contributors:	Dept Text Engn
Keywords:	ULTRADRAWING GEL FILMS CARBON NANOTUBE FIBERS FORMATION TEMPERATURES GELATION CRYSTALLIZATION MECHANICAL-PROPERTIES DRAWING CONDITIONS ALTERNATIVE ROUTE EXTRUDATE SWELL BLENDS BEHAVIOR
Date:	2013-09
Issue Date:	2014-02-24 16:44:07 (UTC+8)
Abstract:	Dimensions of conical dies were found to have a significant influence on thermal, morphological, orientation, ultradrawing, and dynamic mechanical properties of the as-prepared and/or drawn ultrahigh molecular weight polyethylene (UHMWPE) fiber specimens prepared in this study. Many demarcated micro-fibrils were found paralleling to fiber direction of the as-prepared UHMWPE fiber specimens. The percentage crystallinity, melting temperatures, orientation factor (f(o)) and achievable draw ratio (D-ra) values of each as-prepared UHMWPE fiber specimen prepared at a fixed length of outlet land reach a maximum value, as the entry angles of the conical die approach the optimum value at 75 degrees. The maximum f(o) and D-ra values obtained for each F-20(75-y) as-prepared fiber series specimens prepared using the optimum entry angle reach another maximum value as their length of outlet land approach the optimum value of 6.5 mm. The ultimate tensile strengths and moduli of the drawn UHMWPE fibers prepared at the optimum entry angle and length of outlet land are significantly higher than those of fibers prepared at other conditions but stretched to the same draw ratio. Possible reasons accounting for the above interesting properties were discussed in this study. POLYM. ENG. SCI., 2013. (c) 2013 Society of Plastics Engineers
Relation:	POLYMER ENGINEERING AND SCIENCE Volume: 53 Issue: 9 Pages: 1910-1919
Appears in Collections:	[Department of Textile Engineering ] journal articles

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	494	View/Open

View Licence

Loading...