Ultrahigh molecular weight polyethylene fibers prepared using conical dies with varying dimensions

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 期刊論文 > Item 987654321/26738

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/26738

题名:	Ultrahigh molecular weight polyethylene fibers prepared using conical dies with varying dimensions
作者:	Yeh, JT (Yeh, Jen-Taut) Wang, CK (Wang, Chuen-Kai)[ Zhou, Q (Zhou, Qin) Zhou, HP (Zhou, Huo-Peng) Tsai, CC (Tsai, Chih-Chen) Lai, YC (Lai, Yu-Ching) Tsou, CH (Tsou, Chi-Hui) Chen, KN (Chen, Kan-Nan) Huang, CY (Huang, Chi-Yuan) Lee, KC (Lee, Kuei-Chi)
贡献者:	Dept Text Engn
关键词:	ULTRADRAWING GEL FILMS CARBON NANOTUBE FIBERS FORMATION TEMPERATURES GELATION CRYSTALLIZATION MECHANICAL-PROPERTIES DRAWING CONDITIONS ALTERNATIVE ROUTE EXTRUDATE SWELL BLENDS BEHAVIOR
日期:	2013-09
上传时间:	2014-02-24 16:44:07 (UTC+8)
摘要:	Dimensions of conical dies were found to have a significant influence on thermal, morphological, orientation, ultradrawing, and dynamic mechanical properties of the as-prepared and/or drawn ultrahigh molecular weight polyethylene (UHMWPE) fiber specimens prepared in this study. Many demarcated micro-fibrils were found paralleling to fiber direction of the as-prepared UHMWPE fiber specimens. The percentage crystallinity, melting temperatures, orientation factor (f(o)) and achievable draw ratio (D-ra) values of each as-prepared UHMWPE fiber specimen prepared at a fixed length of outlet land reach a maximum value, as the entry angles of the conical die approach the optimum value at 75 degrees. The maximum f(o) and D-ra values obtained for each F-20(75-y) as-prepared fiber series specimens prepared using the optimum entry angle reach another maximum value as their length of outlet land approach the optimum value of 6.5 mm. The ultimate tensile strengths and moduli of the drawn UHMWPE fibers prepared at the optimum entry angle and length of outlet land are significantly higher than those of fibers prepared at other conditions but stretched to the same draw ratio. Possible reasons accounting for the above interesting properties were discussed in this study. POLYM. ENG. SCI., 2013. (c) 2013 Society of Plastics Engineers
關聯:	POLYMER ENGINEERING AND SCIENCE Volume: 53 Issue: 9 Pages: 1910-1919
显示于类别:	[紡織工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	508	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....