文化大學機構典藏 CCUR:Item 987654321/41810
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 47250/51116 (92%)
造访人次 : 14569991      在线人数 : 711
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻
    主页登入上传说明关于CCUR管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/41810


    题名: Preparation of photosensitive polyimides (PSPIs) and their feasible evaluation for lithographic insulation patterns (LIPs) of integrated circuits (ICs) without negative photoresists
    作者: Chen, MH (Chen, Meng-Hsin)
    Lai, CC (Lai, Chiu-Chun)
    Chen, HL (Chen, Hsin-Lung)
    Lin, YH (Lin, Yi-Hung)
    Huang, KY (Huang, Kuan-Yeh)
    Lin, CH (Lin, Chih-Hsiang)
    Hsiao, HT (Hsiao, Ho-Ting)
    Liu, LC (Liu, Lung-Chang)
    Chen, CM (Chen, Chien-Ming)
    贡献者: 紡織系
    关键词: LIGHT-EMITTING-DIODES
    NANOIMPRINT LITHOGRAPHY
    DIELECTRIC-CONSTANT
    COMPOSITE
    CONDUCTIVITY
    INTERFACE
    AEROGELS
    CELLS
    COATINGS
    GRAPHENE
    日期: 2018-12
    上传时间: 2019-01-16 11:16:15 (UTC+8)
    摘要: A photosensitive polyimide (PSPI) with high glass transition temperature (T-g; 259 degrees C), good inherent viscosity (I.V.; 0.31 dL/g), and superb decomposition temperature (T-d; 368 degrees C) has been manufactured by the appropriate prescription of diamine monomer (i.e. 2,2-bis (3-amino-4- hydroxyphenyl)-hexafluoropropane; APAF), dianhydride monomer (i.e. 4,4'-(4,4'- isopropylidenediphenoxy)bis(phthalic anhydride); BPADA), cyclodehydating agent (i.e. p-xylene), base (i.e. N,N,N-triethylamine; TEA), and photosensitive monomer (i.e. acryloyl chloride; AOC). In order to explore the applying feasibility, we have prepared lithographic insulation pattern resin (LIPR) of integrated circuit (IC) with PSPI (i.e. APAF/BPADA/AOC polyimide), solvent (i.e. N-methyl-2-pyrrolidone; NMP), photoinitiator (i.e. 1-305), crosslinking agent (i.e. CLA-1), co-photoinitiator (i.e. 1-309) as well as coupling agent (i.e. vinyltrimethoxysilane; VTES) and utilized it without negative photoreist by silicon wafer, i-line (wavelength: 365 nm; optical density: 1200 mW/cm(2)), and photomask. Experimental results reveal that labmade LIPR of IC based on PSPI is a promising IC package material with high tensile strength of 106 MPa, excellent adhesion on silicon wafer (i.e. eligible of cross-cut examination), great coefficient of thermal expansion (CTE) of 17.9 ppm/degrees C, low dielectric constant (D-k) of 3.5, high surface electric resistance of 8.3 x 10(11) Omega/sq., low dielectric loss (D-f) of 0.01, moderate hygroscopicity of 2.9% (23 degrees C, 24 h), and low residual stress of 32.0 MPa.
    显示于类别:[紡織工程學系] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML332检视/开启


    在CCUR中所有的数据项都受到原著作权保护.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©  2006-2025  - Feedback