| 題名: | 細丹尼聚酯織物以混合鹼劑經高壓蒸處防拔染加工其拔白性和物性之研究
The Study on the Physical Properties of Fine Denier Polyester Fabric Using Resist-Discharge Printing HPS Process with Mixing Alkali Agent |
| 作者: | 劉惠珍
王權泉 |
| 貢獻者: | 紡工系 |
| 關鍵詞: | 細丹尼聚酯織物
鹼防拔染印花
拔白度
高壓蒸處
Fine denier polyester fabric
Alkali discharge-resist printing
Whiteness
High pressure steaming |
| 日期: | 1997-09 |
| 上傳時間: | 2017-07-20 09:55:58 (UTC+8) |
| 摘要: | 本實驗是針對細丹尼聚酯織物以不同比例混合鹼劑經後罩印法和高壓蒸處過程進行鹼防拔染印花，以探討不同之混合鹼對織物拔白性和物性之影響;由實驗結果得知，所使用之混合鹼劑以NaOH/Na□CO□混合鹼，濃度為2%以下，比例75/25時，其拔白效果最佳，不僅可改善單獨使用NaOH易產生暈滲和工程不易控制，且織物之物性亦較使用單鹼為佳及符合經濟效益。
The fine denier polyester fabric was resisted discharge printed using alkali agents with the wet on dry and HPS process. The effect of mixing ratios of alkali agents on the discharge abilities and physical properties of the fabric used was studied. The results show that excellent whiteness and physical properties of the printed fabric can be obtained as the mixing ratio of NaOH/Na2CO3 75/25 the dosage about 2% used. And the mixing alkali agents used for resist discharge printing can not only decrease bleeding, but also easily control process. The physical properties of the printed fabric is better than those of the fabric printed with only one alkali agent. |
| 關聯: | 華岡紡織期刊 4:3 民86.09 頁273-281 |
| 顯示於類別: | [紡織工程學系] 學報-華岡紡織期刊
|
