文化大學機構典藏 CCUR:Item 987654321/36342
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 46962/50828 (92%)
Visitors : 12457224      Online Users : 700
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/36342


    Title: 溶液噴射製備聚甲基丙烯酸丁酯纖維及其油性有機物吸附性能
    Preparation of Poly(butyl methacrylate) Fiber by Solution Blowing and Its Absorptive Performance to Oily Organic Compounds
    Authors: 封嚴
    王剛毅
    莊旭品
    張志飛
    Contributors: 紡工系
    Keywords: 聚甲基丙烯酸丁酯
    溶液噴射
    油性有機物
    Poly(butyl methacrylate)
    Solution Blowing
    Oily Organic Compound
    Date: 2016-05
    Issue Date: 2017-06-27 10:26:06 (UTC+8)
    Abstract: 採用懸浮聚合工藝製備聚甲基丙烯酸正丁酯(PBMA),以甲基丙烯酸β羥乙酯(HEMA)為物理交聯劑,二乙烯基苯(DVB)為化學交聯劑,N,N-二甲基乙醯胺(DMAc)為溶劑,製備紡絲溶液。採用溶液噴射法製備複合交聯結構PBMA 纖維,研究了交聯劑含量及種類對纖維形貌和結構的影響,探討了PBMA 纖維對柴油、機油與大豆油等油性有機物的吸附性能。結果表明,當熱空氣溫度為170℃,擠出速率為10ml/h,牽伸風壓為0.03MPa,抽吸風風量為2520m3/h 時,所得纖維直徑均勻,形態良好。對不同油品的吸附性能測試結果表明,纖維對柴油、大豆油和機油的飽和吸附率分別為14g/g、10g/g 和8g/g,且具有良好的拒水親油性。
    Poly(butyl methacrylate) (PBMA) was synthesized by suspension polymerization. The spinning solution was prepared with hydroxyethyl methylacrylate(HEMA) as physical crosslinking agent, divinyl benzene(DVB) as chemical crosslinking agent and N, N - dimethyl acetamide as solvent. The PBMA fiber with composite crosslinking structure was made via solution blowing process and the influence of the crosslinking agent content on the fiber morphologies was discussed. The absorptive properties of the fiber to diesel oil, engine oil and soybean oil were also studied. The results showed that the fiber diameter was uniform when hot air temperature, extrusion rate, air pressure and suction wind volume was 170 ℃, 10 ml/h, 0.03 MPa and 2520 m3/h, respectively. For different oil absorption test, the saturated oil absorbency of the fiber to diesel oil, soybean oil and engine oil was 14g/g, 10g/g and 8g/g. Also the fiber presented good hydrophobic performance.
    Relation: 華岡紡織期刊 ; 23卷4期 (2016 / 05 / 01) , P218 - 222
    Appears in Collections:[Department of Textile Engineering ] Journal of the Hwa Gang Textile

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML62View/Open


    All items in CCUR are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback