English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 46962/50828 (92%)
造訪人次 : 12458624      線上人數 : 541
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/3176


    題名: 黑色聚酯纖維經針軋後之移行影響
    The Influence on the Migration of the Black Polyester Fiber by Needle Punching
    作者: 邢文灝
    李俊達
    貢獻者: 紡工系
    關鍵詞: 針軋不織布
    纖維移行率
    聚酯纖維
    日期: 2003-10-1
    上傳時間: 2010-05-18 09:54:44 (UTC+8)
    摘要: 本研究主要觀察黑色聚酯纖維在棉網上MD (Machine Direction)及CD(Cross Machine Direction)方向之移行率,探討針軋次數、針軋深度之變化。結果顯示,黑色聚酯纖維在CD方向80°-110°總共150(50%)根以上,在X軸上投影長度高點:1.3cm,在Y軸上投影長度高點:3.3cm,黑色聚酯纖維在MD方向70°-120°總共150(50%)根以上,在X軸上投影長度:3.7cm,在Y軸投影長度:1.7cm。

    In this study, observing that the black polyester fibers migrated in the machine direction and cross directin of the cotton nonwoven fabric. Then researching the change in the times of needle punching and the depth of needle punching. The experimental results indicate that there are more than one hundred fifty black polyester fibers in the cross direction between 80° ~ 100° (50%). The length of projection in X axle: 1.2cm, and the length of projection in Y axle: 3.8cm. And there are more than one hundred fifty black polyester fibers in the machine direction between 70° ~120° (50%). The length of projection in X axle: 3.7cm, and the length of projection in Y axle: 1.7cm.
    關聯: 華岡紡織期刊 10卷3期 P.284-303
    顯示於類別:[紡織工程學系] 學報-華岡紡織期刊

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbText245檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋