English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 47249/51115 (92%)
造訪人次 : 14150978      線上人數 : 632
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2992


    題名: The coarsening of the precipitates in melt-spun Al-Ti-Zr ribbons
    作者: Tsau CH
    Chen YC
    貢獻者: 化工系
    關鍵詞: aluminum alloys
    rapid solidification
    precipitation
    coarsening rate
    hardness testing
    日期: 2002
    上傳時間: 2009-12-11 10:15:26 (UTC+8)
    摘要: Two kinds of Al-Ti-Zr alloys were prepared to investigate the coarsening of the spherical L1(2)-structured Al-3(Ti,Zr) precipitates aging at 425 C for various periods of time. The results indicated that the increasing of Zr-content would result in increasing the coarsening rate of the precipitates. The coarsening coefficients of L1(2)-structured Al-3(Ti0.25Zr0.75) and Al-3(Ti0.25Zr0.25) precipitates in these Al-5 vol.% Al-3(Ti,Zr) alloys are 3.94 x 10(-28) and 1.61 x 10(-28) m(3) h(-1), respectively. In addition, the higher Zr-content Al-3(Ti0.25Zr0.75) precipitates became unstable and formed a kind of complex precipitates after aging for a long period of time. The hardness data shows that the peakaging of both two alloys were aging at 425degreesC for 100h, and the peakaging hardness of Al-0.65Ti-3.22Zr and Al-1.74Ti-1.14Zr alloys were HV 75 and HV 78, respectively. The hardness of Al-0.65Ti-3.22Zr alloy was slightly lower than that of Al-1.74Ti-1.14Zr alloy due to the faster coarsening rate of the Al-3(Ti0.27Zr0.75) precipitates. (C) 2002 Elsevier Science B.V. All rights reserved.
    關聯: MATERIALS CHEMISTRY AND PHYSICS Volume: 73 Issue: 2-3 Pages: 111-117
    顯示於類別:[化學工程與材料工程學系暨碩士班] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbText905檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©  2006-2025  - 回饋