The coarsening of the precipitates in melt-spun Al-Ti-Zr ribbons

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 化學工程與材料工程學系暨碩士班 > 期刊論文 > Item 987654321/2992

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2992

题名:	The coarsening of the precipitates in melt-spun Al-Ti-Zr ribbons
作者:	Tsau CH Chen YC
贡献者:	化工系
关键词:	aluminum alloys rapid solidification precipitation coarsening rate hardness testing
日期:	2002
上传时间:	2009-12-11 10:15:26 (UTC+8)
摘要:	Two kinds of Al-Ti-Zr alloys were prepared to investigate the coarsening of the spherical L1(2)-structured Al-3(Ti,Zr) precipitates aging at 425 C for various periods of time. The results indicated that the increasing of Zr-content would result in increasing the coarsening rate of the precipitates. The coarsening coefficients of L1(2)-structured Al-3(Ti0.25Zr0.75) and Al-3(Ti0.25Zr0.25) precipitates in these Al-5 vol.% Al-3(Ti,Zr) alloys are 3.94 x 10(-28) and 1.61 x 10(-28) m(3) h(-1), respectively. In addition, the higher Zr-content Al-3(Ti0.25Zr0.75) precipitates became unstable and formed a kind of complex precipitates after aging for a long period of time. The hardness data shows that the peakaging of both two alloys were aging at 425degreesC for 100h, and the peakaging hardness of Al-0.65Ti-3.22Zr and Al-1.74Ti-1.14Zr alloys were HV 75 and HV 78, respectively. The hardness of Al-0.65Ti-3.22Zr alloy was slightly lower than that of Al-1.74Ti-1.14Zr alloy due to the faster coarsening rate of the Al-3(Ti0.27Zr0.75) precipitates. (C) 2002 Elsevier Science B.V. All rights reserved.
關聯:	MATERIALS CHEMISTRY AND PHYSICS Volume: 73 Issue: 2-3 Pages: 111-117
显示于类别:	[化學工程與材料工程學系暨碩士班] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	Text	906	检视/开启

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....