境界要素法による射出成形過程の流動解析

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 工學院 > 學報-華岡工程學報 > Item 987654321/28883

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/28883

题名:	境界要素法による射出成形過程の流動解析 Numerical Analysis of the Melt Flow in the Mold with the Boundary Element Method
作者:	李貴琪
贡献者:	華岡工程學報
日期:	1988-07
上传时间:	2014-11-10 15:32:21 (UTC+8)
摘要:	The simulation of the melt flow is necessary to develop high quality products. Various researches are carried out about the numerical analysis of the melt flow in the mold since 1970's and there are the researches such as Finite Difference Technique of one dimension flow by Kamal and Kenig, proposals of FAN method by Broyer and FEM analysis of thermoplastics by Wang. If the flow behavior of the melt is grasped by these methods the orientation distribution of fiber reinforcements in the weld line region is understood and the forecast of the strength becomes possible. However, the mentioned above methods take a long analysis time even if a largescale computer is used. Therefore, a more useful method of numerical analysis and the model of the flow for such an analysis are very essential. The purpose of this study is to clarify the flow behavior of the resin in injection molding and the generating processes of weld line for FRTP and polymers by simulating the flow behavior in the mold with the Boundary Element Method.
關聯:	華岡工程學報； 4 期 (1988 / 07 / 01) ， P261 - 282
显示于类别:	[工學院] 學報-華岡工程學報

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	261	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.