有機界面活性劑對氧化鋁陶瓷射出成形製程的流變行爲影響

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 工學院 > 學報-華岡工程學報 > Item 987654321/28750

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/28750

题名:	有機界面活性劑對氧化鋁陶瓷射出成形製程的流變行爲影響 Influence of Organic Surfactant on the Rheological Behavior of Injection-Molded Alumina Suspension
作者:	曾文甲
贡献者:	華岡工程學報
关键词:	陶瓷射出成形氧化鋁潤滑劑表面吸附流變行爲 Ceramic Injection Molding Surfactant Rheology Agglomeration
日期:	2001-06
上传时间:	2014-11-03 10:23:44 (UTC+8)
摘要:	Effect of three different surfactants, namely, stearic acid (SA), oleic acid (OA) and 12-hydroxystearic acid (HSA), on the rheological properties of injection-molded alumina suspensions has been investigated over a temperature range of 120-150℃ and a shear-rate range of 1,000-l5,000s^(-1). The suspension mixtures exhibit a pseudoplastic flow behavior and a viscosity (η) order of η(subscript SA)＜η(subscript OA)＜η(subscript HAS) over the shear-rate range tested. A particulate network within the mixtures in a form of powder agglomerates was suspected to play a major role in the flow behavior observed, over which, different levels of powder agglomeration were resulted from the varying surfactants used. A model experiment by repeatedly shearing the suspensions under a fixed stress level partially confirmed the hypothesis. This suggests that the particle network restructured itself upon the shear was applied, leading to breakup of the network and improvements in the particle packing.
關聯:	華岡工程學報； 15 期 (2001 / 06 / 01) ， P75 - 82
显示于类别:	[工學院] 學報-華岡工程學報

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	160	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....