有機界面活性劑對氧化鋁陶瓷射出成形製程的流變行爲影響

CCUR > College of Natural Science and Engineering > College of Engineering > College of Engineering > Chinese Culture University Hwa Kang Journal of Engineering > Item 987654321/28750

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/28750

Title:	有機界面活性劑對氧化鋁陶瓷射出成形製程的流變行爲影響 Influence of Organic Surfactant on the Rheological Behavior of Injection-Molded Alumina Suspension
Authors:	曾文甲
Contributors:	華岡工程學報
Keywords:	陶瓷射出成形氧化鋁潤滑劑表面吸附流變行爲 Ceramic Injection Molding Surfactant Rheology Agglomeration
Date:	2001-06
Issue Date:	2014-11-03 10:23:44 (UTC+8)
Abstract:	Effect of three different surfactants, namely, stearic acid (SA), oleic acid (OA) and 12-hydroxystearic acid (HSA), on the rheological properties of injection-molded alumina suspensions has been investigated over a temperature range of 120-150℃ and a shear-rate range of 1,000-l5,000s^(-1). The suspension mixtures exhibit a pseudoplastic flow behavior and a viscosity (η) order of η(subscript SA)＜η(subscript OA)＜η(subscript HAS) over the shear-rate range tested. A particulate network within the mixtures in a form of powder agglomerates was suspected to play a major role in the flow behavior observed, over which, different levels of powder agglomeration were resulted from the varying surfactants used. A model experiment by repeatedly shearing the suspensions under a fixed stress level partially confirmed the hypothesis. This suggests that the particle network restructured itself upon the shear was applied, leading to breakup of the network and improvements in the particle packing.
Relation:	華岡工程學報； 15 期 (2001 / 06 / 01) ， P75 - 82
Appears in Collections:	[College of Engineering] Chinese Culture University Hwa Kang Journal of Engineering

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	160	View/Open

View Licence

Loading...