Nitride films deposited from an equimolar Al-Cr-Mo-Si-Ti alloy target by reactive direct current magnetron sputtering

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 化學工程與材料工程學系暨碩士班 > 期刊論文 > Item 987654321/2545

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2545

题名:	Nitride films deposited from an equimolar Al-Cr-Mo-Si-Ti alloy target by reactive direct current magnetron sputtering
作者:	Chang, Hui-Wen Huang, Ping-Kang Davison, Andrew Yeh, Jien-Wei Tsau, Chun-Huei Yang, Chih-Chao
贡献者:	化材系
关键词:	AlCrMoSiTi multi-element nitride magnetron sputtering coating
日期:	2008
上传时间:	2009-11-06 13:18:14 (UTC+8)
摘要:	Films are deposited from a single Al20Cr20Mo20Si21Ti19 alloy target in various argon/nitrogen atmospheres by direct current magnetron sputtering. Two sets of substrate parameters are examined; one with a substrate temperature of 300 K and the substrate grounded (U-0 (V,) (300 K)), and the other with the substrate biased at -50 V and its temperature maintained at 573 K (U--50 V,U- 573 K). The films produced in pure argon or at lower nitrogen flow rates are amorphous, regardless of the substrate parameters. At higher nitrogen flow rates, however, all of the coatings are found to form an FCC (face-center-cubic) NaCl-type structure. Although this coating system contains several well known immiscible nitrides, i.e. TiN, AN and Si3N4, it is determined that only a single FCC phase forms, namely a single FCC (AlCrMoSiTi)N solid solution, regardless of the deposition conditions. The lower deposition rate and reduced surface roughness of the U--50 V,U- 573 K films compared to the UO V, 300 K films are considered to result from the increased densification and resputtering of coating material. The majority of the coatings are found to have hardnesses of only 10 to 16 GPa. The highest hardnesses of 25 and 22 GPa are obtained for the crystalline nitride U--50 V,U- 573 K coatings deposited at N-2/(Ar+N-2) ratios of 50 and 67%, respectively. More in depth explanations behind the structure and properties of these multi-element films are presented within the paper. (c) 2008 Elsevier B.V. All rights reserved
關聯:	THIN SOLID FILMS Volume: 516 Issue: 18 Pages: 6402-6408
显示于类别:	[化學工程與材料工程學系暨碩士班] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	Text	687	检视/开启

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....