English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 46962/50828 (92%)
造訪人次 : 12453962      線上人數 : 947
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/24288


    題名: Strong amorphization of high-entropy AlBCrSiTi nitride film
    作者: Tsai, CW (Tsai, Che-Wei)
    Lai, SW (Lai, Sih-Wei)
    Cheng, KH (Cheng, Keng-Hao)
    Tsai, MH (Tsai, Ming-Hung)
    Davison, A (Davison, Andrew)
    Tsau, CH (Tsau, Chun-Huei)
    Yeh, JW (Yeh, Jien-Wei)
    貢獻者: Inst Mat Sci & Mfg
    關鍵詞: High-entropy alloy
    Nitride film
    Amorphous structure
    日期: 2012-01
    上傳時間: 2013-02-25 10:45:41 (UTC+8)
    摘要: Amorphous coatings, particular nitride systems, are of interest for numerous practical applications. Nevertheless, at present only a few amorphous nitride coating systems have been considered, the most notably being the (TM, Si)N system (transition metal (TM) = Ti, Zr, W, Mo). The present study provides an alternative approach for producing amorphous nitride films with high thermal stability up to 700 degrees C for 2 h. Films are deposited from an equimolar AlBCrSiTi target in various argon/nitrogen atmospheres at different substrate temperatures. It is found that above the nitrogen flow ratio (i.e. R-N = N-2/N-2 Ar) of 28.6% a near equal ratio between target elements and nitrogen is approached, thus indicating the coatings have the chemical formula of (AlBCrSiTi)N. The glancing-angle X-ray diffractometer and transmission electron microscope investigations indicate that the coatings, regardless of nitrogen concentration or deposition temperature (up to 500 degrees C), are amorphous. Thermal treatment shows that the amorphous structure of this (AlBCrSiTi)N coating is maintained up to 700 degrees C when annealing for 2 h in vacuum. At annealing temperatures of 800 degrees C and above, the amorphous films transform into a simple NaCl-type face-centered cubic solid solution. Even after annealing at 1000 degrees C for 2 h, the grain size is only 2 nm. High entropy effect, large lattice distortion effect, and sluggish diffusion effect are proposed to account for the formation of amorphous nitrides. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.
    關聯: THIN SOLID FILMS 卷: 520 期: 7 頁數: 2613-2618
    顯示於類別:[化學工程與材料工程學系暨碩士班] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML409檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋