資料載入中.....
|
請使用永久網址來引用或連結此文件:
https://irlib.pccu.edu.tw/handle/987654321/21113
|
| 題名: | Microstructure and Properties of Active Screen Plasma Nitrided Duplex Stainless Steel |
| 作者: | Chiu, LH (Chiu, L. H.)
Su, YY (Su, Y. Y.)
Chen, FS (Chen, F. S.)
Chang, H (Chang, H.) |
| 貢獻者: | 機械系 |
| 關鍵詞: | Active screen plasma nitriding
Corrosion
Duplex stainless steel
Wear |
| 日期: | 2010 |
| 上傳時間: | 2011-12-15 15:23:33 (UTC+8) |
| 摘要: | UNS S31803 duplex stainless steel (DSS) was nitrided using the active screen plasma nitriding (ASPN) technique at temperature ranging from 400 to 450 degrees C. Microstructures and corrosion properties of the untreated substrate and AS plasma nitrided specimens were analyzed by means of X-ray diffractometry, scanning electron microscopy, microhardness measurement, anodic polarization test, and wear test using a ring-on-disc tester. The result shows that ASPN specimen surface nitrided at 420 degrees C consisted of a dual phase nitrided layer of nitrogen expanded austenite (N or S-phase) and expanded ferrite (N), which considerably improved the hardness, wear, and corrosion property of the UNS S31803 duplex stainless steel. For ASPN specimens nitrided at 435 degrees C or 450 degrees C, precipitated nitrides of Fe3N, Fe4N and chromium nitride (CrN) appeared in the nitrided layer. The results showed that the wear and corrosion resistance of the specimen nitrided at 420 degrees C for 10h were exceedingly improved, and the specimen exhibited the least wear mass loss and corrosion current density. |
| 顯示於類別: | [機械工程系暨機械工程學系數位機電研究所] 期刊論文
|
在CCUR中所有的資料項目都受到原著作權保護.
|
