| 摘要: | 本研究模擬保全及防災系統，將工廠倉庫安全防災系統智慧化。在模擬的空間中安裝各式感測器及電子元件：溫度感測器、煙霧感測器、火焰偵測器、蜂鳴器、RFID RC522、電磁鎖、磁簧開關，再使用Arduino IDE程式編寫整合，並連結LINE作為接收警示訊息與操作系統使用。如當發生火災時，感測器偵測到濃煙時會透過LINE傳警報訊息給業主及值班保全，提醒保全場域內有災害發生。在安全部分，磁簧開關與蜂鳴器作為安全門警示用，當安全門被開啟時，值班保全會收到安全門開啟警示訊息，便可直接透過操作LINE獲取安全門現場照片，而RFID門禁系統，利用磁卡作為進出場域的身分識別，若使用錯誤卡片便無法進入工廠倉庫內。本研究系統能有效即時提供災害警示訊息及場域進出人員辨識與安全門監控。
This study simulates the security and disaster prevention system to make the factory warehouse safety and disaster prevention system intelligent. Install various sensors and electronic components in the simulated space: temperature sensor, smoke detector, flame detector, buzzer, RFID RC522, electromagnetic lock, reed switch, and then use Arduino IDE to program Integrate, and connect LINE to receive warning messages and operate the system. For example, in the event of a fire, when the sensor detects thick smoke, an alarm message will be sent to the owner and the on-duty security through LINE to remind the security that there is a disaster in the field. In the security part, the magnetic reed switch and the buzzer are used as the warning of the safety door. When the safety door is opened, the security guard on duty will receive the warning message of the safety door opening, and can directly obtain the scene photos of the safety door through the operation LINE. The RFID access control system uses a magnetic card as identification for entering and exiting the field, if the wrong card is used, it will not be possible to enter the factory warehouse. This research system can effectively provide disaster warning information in real-time, identify personnel entering and exiting the field, and monitor safety doors. |
