An Idealized Landslide Failure Surface and Its Impacts on the Traveling Paths

文化大學機構典藏 CCUR > 理工學院 > 理學院 > 地質系 > 期刊論文 > Item 987654321/48715

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/48715

题名:	An Idealized Landslide Failure Surface and Its Impacts on the Traveling Paths
作者:	Tai, YC (Tai, Yih-Chin) Ko, CJ (Ko, Chi-Jyun) Li, KD (Li, Kun-Ding) Wu, YC (Wu, Yu-Chen) Kuo, CY (Kuo, Chih-Yu) Chen, RF (Chen, Rou-Fei) Lin, CW (Lin, Ching-Weei)
贡献者:	地質系
关键词:	landslide slope failure failure surface idealized curved surface (ICS) flow paths hazard assessment
日期:	2020-08-21
上传时间:	2020-10-26 14:34:18 (UTC+8)
摘要:	Numerical scenario simulation may serve as an efficient and powerful tool for hazard assessment, but it often suffers from the lack of a definite failure surface before the occurrence of failure. In the present study, an idealized curved surface (ICS) is proposed for mimicking the sliding surface in the numerical simulation. Different from the conventional Sloping Local Base Level (SLBL) or Scoops3D method, this idealized surface consists of two curvatures, which are defined in the down-slope and cross-slope directions, respectively. Applying this idealized surface to 45 historical landslides of sliding type in southern Taiwan, two specific relations of geometry (length, curvature radius, and depth) in the down-slope and cross-slope directions are figured out. These specific relations simplify the complexity of constructing the idealized curved surface for areas prone to landslides for the sake of hazard assessments. That is, once the area with landslide susceptibility is identified and the associated released volume is given, the idealized sliding surface can be uniquely determined with the help of these geometric relations. The proposed method is integrated with a two-phase grain-fluid model and numerically validated against a historical large-scale landslide for investigating its feasibility. Although the idealized failure surface may deviate from that determined by the post-event investigation, it is interesting to note that the major discrepancy is mainly found at the first stage. The differences (both flow thickness and paths) reduce over time, and only minor discrepancies can be identified at the deposition stage. These findings reveal the weak co-relation between the geometry of the failure surface and the flow paths. It also indicates the feasibility of the ICS for predicting the flow paths by scenario investigation, especially when the exact sliding surface of a landslide is not available.
關聯:	FRONTIERS IN EARTH SCIENCE 卷冊: 8 文獻號碼: 313
显示于类别:	[地質系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	358	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....