English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 46965/50831 (92%)
造訪人次 : 12654247      線上人數 : 652
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/44675


    題名: Evaluation of surface properties of low density polyethylene (LDPE) films tailored by atmospheric pressure non-thermal plasma (APNTP) assisted co-polymerization and immobilization of chitosan for improvement of antifouling properties
    作者: Pandiyaraj, KN (Pandiyaraj, K. N.)
    Ramkumar, MC (Ramkumar, M. C.)
    Kumar, AA (Kumar, A. Arun)
    Padmanabhan, PVA (Padmanabhan, P. V. A.)
    Pichumani, M (Pichumani, M.)
    Bendavid, A (Bendavid, Avi)
    Cools, P (Cools, Pieter)
    De Geyter, N (De Geyter, N.)
    Morent, R (Morent, R.)
    Kumar, V (Kumar, Vinay)
    Gopinath, P (Gopinath, P.)
    Su, PG (Su, Pi-Guey)
    Deshmukh, RR (Deshmukh, R. R.)
    貢獻者: 化學工程與材料工程學系暨奈米材料研究所
    關鍵詞: DIELECTRIC BARRIER DISCHARGE
    BLOOD COMPATIBILITY
    2-METHACRYLOYLOXYETHYL PHOSPHORYLCHOLINE
    GRAFT-COPOLYMERIZATION
    POLY(ETHYLENE GLYCOL)
    AGING BEHAVIOR
    CELL-ADHESION
    CARBON-FIBER
    METHACRYLATE
    POLYMERS
    日期: 2019-01-01
    上傳時間: 2019-06-25 15:54:42 (UTC+8)
    摘要: This work describes the development of antifouling functional coatings on the surface of low density polyethylene (LDPE) films by means of atmospheric pressure non-thermal plasma (APNTP) assisted copolymerization using a mixture of acrylic acid and poly (ethylene glycol). The aim of the study was to investigate the antifouling properties of the plasma copolymerized LDPE films and the same was carried out as a function of deposition time with fixed applied potential of 14 kV. In a second stage, the plasma copolymerized LDPE films were functionalized with chitosan (CHT) to further enhance its antifouling properties. The surface hydrophilicity, structural, topographical and chemistry of the plasma copolymerized LDPE films were examined by contact angle (CA), X-ray diffraction (XRD), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Coating stability was also studied in detail over a storage time of 15 days by storing in water and air. The antifouling properties of the plasma copolymerized LDPE films were examined via protein adsorption and platelet adhesion studies. CA study showed significant changes in surface wettability after the coating process. XPS and FTIR analysis proved the presence of a dense multifunctional coating and an efficient immobilization of CHT. Substantial amendments in surface topography were observed, positively enhancing the overall surface hydrophilicity. Finally, in-vitro analysis showed excellent antifouling behavior of the surface modified LDPE films.
    關聯: Materials Science and Engineering: C
    Volume 94, 1 January 2019, Pages 150-160
    顯示於類別:[化學工程與材料工程學系暨碩士班] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML470檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋