文化大學機構典藏 CCUR:Item 987654321/44662
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 47225/51091 (92%)
造访人次 : 13993130      在线人数 : 218
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻
    主页 ‧ 登入 ‧ 上传 ‧ 说明 ‧ 关于CCUR ‧ 管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/44662


    题名: High-aspect ratio mechanical microdrilling process for a microhole array of nitride ceramics
    作者: Chang, DY (Chang, Dar-Yuan)
    Lin, CH (Lin, Chien-Hung)
    贡献者: 機械工程系暨機械工程學系數位機電研究所
    关键词: TOOL LIFE
    HOLE
    TUNGSTEN
    FRACTURE
    FORCES
    日期: 2019-02
    上传时间: 2019-06-25 14:51:26 (UTC+8)
    摘要: In semiconductor industry, wafer testing requires a microhole array constructed by high-density holes below phi 100m for stabilizing the microprobe used in conduction testing. This study conducted mechanical microdrilling experiments of a nitride ceramic sheet to investigate the effects of drilling parameters on quality characteristics of the microhole drilled. Fabrications of a high-aspect ratio microhole must be implemented by segmented machining. A center pilot hole was first made and then drilled the microhole by a two-segment process. Drilling factors analyzed in this study included depth of the center pilot hole, depth ratio of the hole segments, and machining parameters of cutting speed (spindle rotation rate), tool feed rate, and step in peck drilling in the microdrilling. Because both diameter and position of the microhole affect the functionality of hole array directly, this is a multi-objective problem. This study proposes a new decision method for deriving the optimal parameter level set in the multi-object problem based on the level effects obtained from Taguchi's analyses. In addition, this study used a scanning electron microscopy (SEM) to observe the influences of drilling stroke on flank wear of the microdrill. This study implemented two series experiments of phi 69m and phi 55m with aspect ratios of 15.36 and 11.64, respectively. Experimental results indicate that applying the optimal parameter level set derived in phi 55m experiment could obtain excellent performances after the drilling stroke of 384mm, 600 holes drilled. The microdrills have fulfilled a high use efficiency.
    關聯: The International Journal of Advanced Manufacturing Technology volume 100, pages2867–2883(2019)
    显示于类别:[機械工程系暨機械工程學系數位機電研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML263检视/开启


    检视Licence

    在CCUR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈