Detection of ppb-level NO2 gas using a portable gas-sensing system with a Fe2O3/MWCNTs/WO3 sensor using a pulsed-UV-LED

文化大學機構典藏 CCUR > 理工學院 > 理學院 > 化學系所 > 期刊論文 > Item 987654321/44649

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/44649

题名:	Detection of ppb-level NO2 gas using a portable gas-sensing system with a Fe2O3/MWCNTs/WO3 sensor using a pulsed-UV-LED
作者:	Su, PG (Su, Pi-Guey) Yu, JH (Yu, Jia-Hao) Chen, IC (Chen, I-Cherng) Syu, HC (Syu, Hong-Ci) Chiu, SW (Chiu, Shih-Wen) Chou, TI (Chou, Ting-I)
贡献者:	化學系所
关键词:	THIN-FILMS CARBON NANOTUBES LOW-TEMPERATURE WO3 LIGHT FABRICATION ACTIVATION NOISE
日期:	2019-02-21
上传时间:	2019-06-25 13:25:03 (UTC+8)
摘要:	A portable gas-sensing system which is periodically irradiated with light from a pulsed ultraviolet light emitting diode (UV-LED) was fabricated for sensing ppb-level NO2 gas. The portable NO2 gas-sensing system includes a device manager coupled to a pulsed-UV-LED sensing module, a liquid-crystal display module and a data capture module. The sensor made of a composite iron oxide/multi-walled carbon nanotubes/tungsten oxide (Fe2O3/MWCNTs/WO3) material was produced by a one-pot polyol method followed by metal organic decomposition (MOD). Scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD) were used to analyze the structure and morphology of the fabricated films. The effects of the wavelength and duration of the irradiation on the response of the portable gas-sensing system for sensing NO2 gas were studied. This portable gas-sensing system in periodically pulsed-UV-LED operation mode exhibited high sensitivity, good linearity, good stability, high reproducibility, a low detection limit and high selectivity in the sensing of NO2 gas.
關聯:	Anal. Methods, 2019,11, 973-979
显示于类别:	[化學系所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	220	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....