Investigation on the interface modification of PET/PP composites

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 期刊論文 > Item 987654321/44617

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/44617

题名:	Investigation on the interface modification of PET/PP composites
作者:	Wu, CM (Wu, Chang-Mou) Murakami, RI (Murakami, Ri-Ichi) Lai, SG (Lai, Syuan-Guang) Lin, PC (Lin, Po-Chun) Koinkar, P (Koinkar, Pankaj) Lee, KC (Lee, Kuei-Chi) Lai, CC (Lai, Chiu-Chun) Rwei, SP (Rwei, Syang-Peng)
贡献者:	紡織工程學系
关键词:	BEHAVIOR
日期:	2019-05-30
上传时间:	2019-06-18 11:49:51 (UTC+8)
摘要:	In this study, surface modifications and manufacturing processes for polyethylene terephthalate (PET)/polypropylene (PP) composites were developed. When non-polar PP resin is combined with polar polyester fiber, its compatibility and wettability are the key technologies. Maleic anhydride-grafted PP (MAPP) was blended with PP to improve the polarity of the PP resin and react with PET fibers. In addition, a primer was applied to the PET fabric to improve the bonding and reactivity of PET fiber and MAPP. PET/PP composites that imitated the texture and appearance of carbon fabric were prepared by thin film stacking method. The effect of MAPP and primer on interfacial bonding was evaluated by single-fiber pullout test. The mechanical properties of the PET/PP composites such as impact, and open-hole tensile strength (OHT), were studied.
显示于类别:	[紡織工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	308	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.