一,代表著作之中文摘要.Ni-25Al-xFE介金屬合金之複合結構對機械性質的影響 -- 二,代表著作.The composite Microstructures' Effect on the Mechanical Properties of Ni-25Al-xFe Intermetallics -- 三,參考著作:Microstructures and Mechanical Properties of Ni-Al-Fe-X Intermetallics Based on Ni-25Al-27.5Fe Alloy -- Improved Microstructures and Mechanical Properties of 2024 Aluminum Alloy Produced by a Reciprocating Extrusion Method -- Microstructure Evolution of Mechanical Alloyed Ni-24at%Si -- The Microstructure and Mechanical Properties of Niobium Modified Ni-25Al-27.5Fe Intermetallics -- Microstructure Investigation in B2 phased Ni-25Al-40Fe Intermetallic Compound -- 四.著作一覽表(1)國際期刊論文,Microstructures and Mechanical Behaviors ofNi-Al-Fe Intermetallic Compounds -- The Effect of Niobium Additions on the Fracture of Ni-19Si-Based Alloys -- Disordering of the Ni3Si Intermetallic Compound by Mechanical Milling -- A Study on the Microstructures and Properties of an A390.0 Aluminum Alloy Produced by Layer-Depositied Process -- How would Silicon Affect Magnetic and Transport Properties of (Fe-V)80(BSi)20 Glass -- The Coarsening of Silicon Particles in a Submicron-Grained Layer-Deposited Al-12wt.%Si Alloy -- The Effect of the Chromium additions on the Mechanical Properties of the Ni-25Al-27.5Fe-Based Intermetallic Compound -- Microstructure Investigation in B2 phased Ni-25Al-40Fe Intermetallic Compound -- The Microstructure and Mechanical Properties of Niobium Modified Ni-25Al-27.5Fe Intermetallics -- Microstructure Evolution of Mechanical Alloyed Ni-24at%Si -- Improved Microstructures and Mechanical Properties of 2024 Aluminum Alloy Produced by a Reciprocating Extrusion Method -- Microstructures and Mechanical Properties of Ni-Al-Fe-X Intermetallics Based on Ni-25Al-27.5Fe Alloy -- The Composite Microstructures' Effect on the Mechanical Properties of Ni-25Al-xFe Intermetallics -- The Coarsening of the Precipitates in Melt-Spun Al-Ti-Zr Ribbons -- High-Temperature Mechanical Properties of Ni-Al-Fe-X Intermetallic Alloys -- Rapid Solidification Effect on the Ni-25Al-xFe Intermetallics -- (2).國內外會議論文及專書論文,A390.0鋁合金層積式速凝製程之硏究及特性分析 -- Al-Ti-Zr合金析出相之硏究 -- The Coarsening of Silicon Particles in a Rapidly Solidified Al-12Si Alloy -- Characteristics ofNi-Al-Fe Intermetallic Compounds -- Factors Affect the Quality of Rapidly Quenched Fe-6.5wt.%Si Alloy in the Melt-Spinning Method -- Destabilization of Ni3Si Intermetallic Compound by Mechanicaical Milling -- Phase Transition in Rapidly Solidified Al-Zr-V and Al-Ti-Zr Alloys -- Microstructures and Mechanical Behaviors of Ni-Al-Fe Intermetallic Compounds -- The Effect of Niobium Additions on the Fracture of Ni-19Si-Based Alloys -- Al-Ti-Zr合金之析出硏究 -- Microstructures and Mechanical Behaviors of Ni-Al-Fe Intermetallic Compounds -- The Effect of Nb Additions on the Mechanical Properties of an Ni-19Si Based Alloy -- Study on the Microstructures of Rapidly Quenched Ni-Al-Fe Compounds -- Factors Affecting the Properties of Rapidly Solidified Fe-6.5wt%Si Alloy in the Melt-Spinning Method -- 添加鉻元素對Ni-19Si-(Nb,B)合金機械性能之影響 -- The Effect of Cr Additions on the Mechanical Properties of an Ni-19Si Based Alloy -- 熱處理對SUS304薄鋼片連鑄產品性質之硏究 -- 薄鋼片連鑄製程之硏究 -- (Sm2-xRx)Fe17Bx(R=Nb,Tb)快速凝固薄帶之磁性質硏究 -- 添加鉻元素對Ni-25Al-27.5Fe介金屬化合物機械性質之影響 -- The Temperature Dependence on the Mechanical Properties of the Ni-19Si Based Alloys -- Structure Investigation in B2 phased Ni-25Al-40Fe Compound -- SUS304薄鋼片連鑄製程之硏究 -- The Microstructures and Mechanical Properties of Niobium Modified Ni-25Al-27.5Fe Intermetallics -- The Effect of the Chromium additions on the Mechanical Properties of the Ni-25Al-27.5Fe-Based Intermetallic Compound -- Mechanical Properties of Ni-Al-Fe-X Compounds Based on the Ni-25Al-27.5Fe System -- The Effect of Niobium Additions on the Microstructures and Mechanical Properties of Ni-25Al-27.5Fe Intermetallics -- Ni-25Al-xFe介金屬合金之複合微結構對機械性質之影響 -- Formation of Nanocrystalline Ni3Si Intermetallic Compound by Mechanical Alloying -- 不銹鋼薄片連鑄之製程參數硏究 -- The Composite Structure Affect on the Mechanical Properties of Ni-25Al-xFe Intermetallics -- A Study on the Rapidly Quenched Ni-25Al-xFe Ribbons -- A Study on the High-Temperature Mechanical Properties of Ni-Al-Fe-X Intermetallic Alloys -- High-Temperature Mechanical Properties of Ni-Al-Fe-X Intermetallic Alloys -- The Effects of Interfaces on the Mechanical Properties of Ni-Al-Fe Intermetallics -- a(3),技術報告,薄片連鑄製程技術評估 -- SUS304不銹鋼薄片連鑄製程技術硏究I -- SUS304不銹鋼薄片連鑄製程技術硏II -- 不銹鋼纖維過濾網製程試驗開發可行性評估結案報告書 -- Strip Casting製程技術III -- Strip Casting製程技術(IV) -- 耐熱輥輪套管開發 -- 耐熱輥輪套管開發II -- 五.參考資料表 -- 高性能金屬細線加工及應用輔導計劃(1998.7-1999.2) -- 不銹鋼抽拉伸線製程輔導(1997.7-1998.6) -- 耐熱鋼輥輪套管開發(1995.7-1997.6) -- 熱輻射管制作曁檢驗(1994.10-1995.5) -- 不銹鋼纖維過濾網製程試驗開發(1992.7-1993.6) -- 薄鋼片連鑄製程開發(1990.7-1995.6) -- 崁環鋁熱浸技術合作計劃(1992.7-1993.6) -- 變形加工對鎳鋁鐵基介金屬合金之影響硏究 -- 子計劃:非奈晶材料之製程機制與分析 -- 子計劃:非奈晶材料之製程機制與分析(II).
