一.代表著作,In situ pultrusion of urea-formaldehyde matrix comopo sites. I:Processability,kinetic analysis and dynamic mechanical properties -- 二,參考著作.(A).期刊論文,The mathematical model for the pultrusion of blocked PU-UP matrix composites -- Simultaneous full-interpenetrating polymer networks of blocked polyurethane and vinylester.Part I.Synthesis,swelling ratio,thermal properties and morphology -- Simultaneous full-interpenetrating polymer networks of blocked polyurethane and vinylester.II.Static and dynamic mechanical properties -- The development of glass fiber reinforced polystyrene for pultrusion. I. Process feasibility ,dynamic mechanical properties,and postformability -- The development of glass fiber reinforced polystyrene for pultrusion. II. Effect of processing parameters for optimizing the process -- Pultruded fiber-reinforced PMMA/PUIPN composites:processability and mechanical properties -- In-situ pultrusion of urea-formaldehyde matrix comoposites. II:Effect of processing variables on mechanical properties -- Synthesis,thermal properties and morphology of interpenetrating polymer networks of blocked polyurethane and epoxy -- Static and dynamic properties of interpenetrating polymer networks of blocked polyurethane and epoxy -- Synthesis and characterization of polymethylmethacrylate/montmorillonite nanocomposites -- Thermal properties of polymethylmethacrylate/montmorillonite nanocomposites -- The manufacturing of thermoplastic PS prepregs -- The manufacturing of thermoplastic sandwich composites -- (B).中文期刊論文 -- 熱塑性聚苯乙烯拉擠成型預浸材之製備及其在三明治結構之應用 -- 混成纖維強化乙烯酯拉擠成型複合材料之製備 -- 玻璃纖維強化熱塑性聚苯乙烯拉擠成型品之製備 -- 纖維強化不飽和聚酯/聚氨基甲酸酯之互穿型網狀結構樹脂拉擠成型加工法:加工參數及材料特性硏究 -- (C).硏討會論文,The processing parameters of pultruded glass fiber reinforced urea-formaldehyde composites (I) -- 玻璃纖維強化尿素甲醛樹脂拉擠成型複合材料:加工可行性之探討 -- 玻璃纖維強化尿素甲醛樹脂拉擠成型複合材料:加工參數之探討 -- Pultruded fiber reinforced urea-formaldehyde composites:synthesis of prepolymer and processibility -- 混成纖維強化乙烯酯拉擠成型複合材料:加工參數探討 -- 杜塞型聚氨基甲酸酯/乙烯酯之IPN材料:機械與熱性質 -- Effect of processing parameters on pultruded fiber reinforced vinyl ester/blocked PU IPN composites -- 玻璃纖維強化熱塑性聚苯乙烯拉擠成型複合材料(II) -- The development of fiber-reinforced thermoplastic polystyrene composites for pultrusion (I) -- 混成纖維強化乙烯酯拉擠成型複合材料:加工可行性與混成纖維含量之影響 -- 杜塞型聚氨基甲酸酯/乙烯酯之互穿型高分子網狀結構材料 -- 纖維強化熱塑性聚苯乙烯拉擠成型加工法加工參數及複合材料特性之硏究.
