THE INVESTIGATION OF THE TWO-PHASE THERMOSYPHON PERFORMANCE LIMIT

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 機械工程系暨機械工程學系數位機電研究所 > 期刊論文 > Item 987654321/41891

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/41891

题名:	THE INVESTIGATION OF THE TWO-PHASE THERMOSYPHON PERFORMANCE LIMIT
作者:	Chang, CC (Chang, Chih-Chung) Huang, ZL (Huang, Zun-Long) Chiang, YC (Chiang, Yuan-Ching) Chen, SL (Chen, Sih-Li)
贡献者:	機械工程系暨機械工程學系數位機電研究所
日期:	2018-04
上传时间:	2019-01-17 16:07:25 (UTC+8)
摘要:	In a steel plant, waste heat recovery systems of hot-blast furnace are characterized by high-temperature exhaust gas from a hot stove that flows through heat pipe heat exchangers. By heating gas in a hot stove and combustion air in a blast furnace, stable and balanced heat exchange efficiency is achieved in this system. The thermosyphon, which is also known as a gravitational heat pipe, uses latent heat to transfer the heat. In this article, heat pipe performance limits, including entrainment and boiling limits, are experimentally and theoretically investigated. Heat pipe tube lengths of 130 mm, 200 mm, and 300 mm were used in the experiment, and the operating temperature and heat transfer rates obtained were compared in a MATLAB prediction program to determine when boiling and entrainment limits occur. The precision comparisons of the theoretical and experimental results were 8.7% and 6.7%, respectively. Therefore, a standard test method and prediction program for boiling and entrainment limits are presented in this study, and the heat transfer phenomena in heat pipes of any scale are explained when these limits occur. Additionally, according to data from the China Steel Corporation, the capacity limit of the heat transfer rate for the heat pipe in this study is calculated at 8,370 W.
显示于类别:	[機械工程系暨機械工程學系數位機電研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	204	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....