Siblings thesis [126/157] Previous Exams [22/22] Exams [20/20] monograph [5/6] conference paper [4/6] journal articles [216/237] project [123/132] Collection Statistics Item counts issued in 3 years:0(0.00%) Items With Fulltext:33(100.00%) Download counts of the item Download times greater than 0:33(100.00%) Download times greater than 100:33(100.00%) Total Bitstream Download Counts:7309(1.98%) Last Update: 2025-01-10 20:31 Top Upload Loading... Top Download Loading... Recent Submissions 利用知識工程技術進行支撐結構設計評估與設計改善之研究 The magnetic-nanofluid heat pipe wi... Bending vibration of axially loaded... 藍寶石基板奈米級V型溝槽切削深度及溫升之研究 溫度與溼度對PBI/H3PO4燃料電池特性影響之研究 Robust tracking control design and ... Impacts of mold material and patter... 模擬高等熱塑性複合材料之多層薄板熱壓成型 質子交換膜燃料電池中陰極層汽液界面位置對性能之影響 Effects of Electric Double Layer on...

Jump to: [Chinese Items]   [0-9]   [ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ] or enter the first few letters:

Showing items 1-33 of 33. (1 Page(s) Totally) 1  View [10|25|50] records per page

Date	Title	Authors
2014	Bending vibration of axially loaded Timoshenko beams with locally distributed Kelvin-Voigt damping	陳為仁
2002	Characterization of fractal surfaces	吳俊仲
2004-12	Effects of Electric Double Layer on Bypass Transition in Microchannel Flow	許桓瑞
2009	Geometric parameter design of a cantilever probing needle used in epoxy ring probe card	張達元等著
2003-07	IC導線架橋帶剪切製程之剪切參數模型與沖頭磨耗分析研究	張達元
2012	Impacts of mold material and pattern size for ultrasonic nanoimprint lithography	林建宏
2006	A laser sensor with multiple detectors for freeform surface digitization	張達元等著
2014	The magnetic-nanofluid heat pipe with superior thermal properties through magnetic enhancement	江沅晉等著
2009	The multiphysics analysis of the metallic bipolar plate by the electrochemical micro-machining fabrication process	張達元等著
2009	A new probe design combining finite element method and optimization used for vertical probe card in wafer probing	張達元等著
2014	The position analysis of Assur Kinematic chain with five links	鐘文遠
2011	Process Parameter Experiments on Vacuum Casting Using a Silicone Rubber Mold for ABS Plastic Parts	張達元等著
2011	Process Simulation-Assisted Fabricating Micro-Herringbone Grooves for a Hydrodynamic Bearing in Electrochemical Micromachining	張達元等著
2007	Quality prediction model of the sheet blanking process for thin phosphorous bronze	張達元等著
2012	Robust tracking control design and its application to balance a two-wheeled robot steering on a bumpy road	蘇國和
2011	Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process	張達元等著
2006	Surface faults evaluation by optical imaging method for electropolishing process	張達元等著
2011	Tool Wear, Hole Characteristics, and Manufacturing Tolerance in Alumina Ceramic Microdrilling Process	張達元等著
2011	利用知識工程技術進行支撐結構設計評估與設計改善之研究	鄭振興
2007	升等著作	江毅成
2011	小型威爾斯風扇葉片設計研究	張達元等著
2007	應用RE/RP/RT技術於手掌按摩矽膠軟墊之開發研究	張達元
2011	應用最小區間法評估微探針模組之共面度誤差	張達元等著
2012	敎師升等著作	江毅成
2002	敎師升等著作	吳俊仲
1995	模擬高等熱塑性複合材料之多層薄板熱壓成型	秦咸寧
2010	溫度與溼度對PBI/H3PO4燃料電池特性影響之研究	陳震宇
2006-06	臺灣電子玩具產業分析之硏究	許逸弘
2012	藍寶石基板奈米級V型溝槽切削深度及溫升之研究	徐英智
2007	質子交換膜燃料電池中陰極層汽液界面位置對性能之影響	李純怡
2007	超音波奈米轉印技術	林建宏
2009	造型塑件之曲面重建與模流分析研究	張達元
2010	鋁基燒結陶瓷薄板之百微米微鑽針實驗	張達元等著

Showing items 1-33 of 33. (1 Page(s) Totally) 1  View [10|25|50] records per page