文化大學機構典藏 CCUR:Item 987654321/39675
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 46965/50831 (92%)
Visitors : 12666565      Online Users : 1083
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/39675


    Title: 水性PU發泡體研究
    Water-Based Polyurethane Foam
    Authors: 篠原勝治
    謝建正
    Contributors: 紡工系
    Keywords: 自身乳化型水性聚氨基甲酸酯
    發泡體
    Self-Emulsifying Water-Based Polyurethane
    Foam
    Date: 2017-11
    Issue Date: 2018-03-30 10:49:13 (UTC+8)
    Abstract: 聚氨基甲酸酯(以下稱為PU)發泡是很重要的用途。發泡方法大致分為2種方法,物理發泡和化學發泡。物理發泡是活用發泡劑的發泡、機械發泡等。化學發泡是由與Isocyanate化合物和水反應發生二氧化碳氣體的發泡。研究化學發泡體。簡單只加水、發泡體的泡沫會粗,且手感有偏硬的傾向。此研究為了活用水性樹脂中的水、以添加預聚物且分散在水性樹脂中。為了改良對水性樹脂分散性、活用自身乳化型預聚物(親水基:COOH基)。研究針對黏度、分散性、發泡性、穩定性與預聚物的相關性進行探討,其中預聚物的COOH%控制在0.5%~1.0%;預聚物的NCO%是3%~7%時,該發泡體氣泡細、柔軟、且Pot-life比較長。預聚物添加量要40%~80%。另外本樹脂除了作為發泡體亦可當接著劑用。
    Polyurethane foaming is a very important. Foaming method can be divided into two kinds of methods, physical foaming and chemical foaming. The physical foaming is the foaming of the foaming agent, the mechanical foaming. Chemical foaming is caused by the reaction of the isocyanate compound with water to produce a carbon dioxide gas. This study is the chemical foam. If simply add water, then the foam will be thick and rigid. In order to utilize the water of aqueous resin, it is decided to add the pre-polymer and disperse it in the aqueous resin. In order to improve the dispersibility of the aqueous resin, we used emulsified pre-polymer (hydrophilic group: COOH group). The COOH% of the pre-polymer was controlled at 0.5% to 1.0%; the NCO% of the pre-polymer was 3% to 7%, and the COOH% of the pre-polymer was controlled at 0.5% to 1.0%, the foam bubbles are thin, soft, and Pot-life is long. The amount of pre-polymer added is 40% to 80%. In addition, the resin may be used as adhesive agent.
    Relation: 華岡紡織期刊 Vol.24, No.9(2017-11) p.525-532
    Appears in Collections:[Department of Textile Engineering ] Journal of the Hwa Gang Textile

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML200View/Open


    All items in CCUR are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback