聚四氟乙烯纖維製程燒結溫度分析研究

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 學報-華岡紡織期刊 > Item 987654321/39634

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/39634

题名:	聚四氟乙烯纖維製程燒結溫度分析研究 Research of Sintering Temperature of Polytetrafluoroethene (PTFE) Matrix-spun Fiber
作者:	梁景海林煌山吳政軒程志豪許凱博
贡献者:	紡工系
关键词:	PTFE 分子量燒結溫度熱重損失 PTFE Molecular Weight Burning Degree Thermogravimetric Loss
日期:	2017-07
上传时间:	2018-03-29 13:20:55 (UTC+8)
摘要:	本文探討PTFE載體紡絲纖維在不同燒結溫度下其載體燒除率之研究。以平均分子量為3×10^6~5×10^6 與5×10^7之PTFE懸浮液與海藻酸鈉為紡絲液載體，利用載體紡絲法紡製PTFE/海藻酸初生纖維，以250、300、320、340、360、380、400及420°C為燒結溫度進行初生纖維載體燒結試驗。以FTIR分析燒結後纖維結果可發現，隨燒結溫度上升，海藻酸鈉特徵峰隨之下降，PTFE特徵峰值則維持一定，另由TGA熱重分析結果可知當燒結溫度大於340℃，其熱重損失量小於15%，可驗證初生纖維經340℃以上溫度燒結過後，85%以上之海藻酸鈉可被燒除，藉此驗證經過燒結後可燒除PTFE初生纖維內的海藻酸鈉載體。 In this research, investigating PTFE matrix-spun fiber with different temperature which the matrix removed rate, the newborn fiber were combined PTFE dispersion with alginate solution, the mean of PTFE molecular weight is 3×10^6~5×10^6 and 5×10^7. In research, the burning temperature is from 250 °C to 420°C, analysis burning product by FTIR, when the burning temperature raised, the peak of alginate was decreased and the peak of PTFE was consistent, analysis burning product by TGA, the thermogravimetric loss less than 15% when the burning temperature over 340 degree. It was proved that the alginate loss more than 85% could be burned by burning above 340 degree. It was proved that the alginate in the newborn fibers could be removed after burning.
關聯:	華岡紡織期刊； 24卷5期 (2017 / 07 / 01) ， P257 - 261
显示于类别:	[紡織工程學系] 學報-華岡紡織期刊

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	103	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....