熔噴複合不織布之研究

CCUR > College of Natural Science and Engineering > College of Engineering > Department of Textile Engineering > Journal of the Hwa Gang Textile > Item 987654321/36930

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/36930

Title:	熔噴複合不織布之研究 The Study on the Composited Meltblown Nonwoven
Authors:	郭靜雅張志鵬潘毅鈞林永浩
Contributors:	紡工系
Keywords:	熔噴複合不織布針軋尼龍透氣度 Meltblown Needle punching Air permeability
Date:	1997-12
Issue Date:	2017-07-26 10:36:23 (UTC+8)
Abstract:	本文主要以尼龍熔噴不織布及尼龍和聚酯短纖維經針軋過程加以複合，探討複合後不織布物性的影響。由實驗與數據可知，尼龍熔噴不織布加短纖複合後，經針軋工程強化後，確實增加強度，在原料方面，以尼龍和尼龍熔噴不織布複合時具有最佳抗拉強度、撕裂強度及破裂強度，而且隨著聚酯纖維混合，不織布強度物理性質有下降趨勢，但在透氣度上則有顯著增加。 The Nylon meltblown nonwoven composited with Nylon and PET staple fibers was manufactured by the needle punching process. The experimental results, show that the Nylon meltblown nonwoven preneedled has the density of around 60 needles/cm□. The Nylon meltblown composited with Nylon staple fiber has good results in breaking strength, tearing strength & bursting strenth respectively. The physical properties decreases with increasing PET fiber, but the Air Permeability significantly increases.
Relation:	華岡紡織期刊 4:4 民86.12 頁427-434
Appears in Collections:	[Department of Textile Engineering ] Journal of the Hwa Gang Textile

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	106	View/Open

View Licence