回收紙漿於再製纖維板之成型性研究

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 學報-華岡紡織期刊 > Item 987654321/36915

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/36915

题名:	回收紙漿於再製纖維板之成型性研究 The Research of Applying Recycled Pulp on Fiber Board Molding Ability
作者:	邢雅棠張志鵬
贡献者:	紡工系
关键词:	回收紙漿熱壓纖維板 Recycle Pulp Hot press Fiber board
日期:	1998-12
上传时间:	2017-07-26 09:05:29 (UTC+8)
摘要:	本研究係利用回收之廢新聞用紙為原料，透過紙漿生產、紙漿脫黑及熱壓成板等過程製造成纖維板，並且藉由改變纖維板構成之密度，探討產品之最佳製造條件與機械性質。結果顯示，在密度0.6 g/cm�艦H上時，纖維板可得到較佳之成型性與較穩定之機械性質。並且，隨著密度的提高，纖維板之靜曲強度、耐壓縮強度、拉伸強度及吸水厚度膨脹率均升高，而含水率與吸水率則會隨之下降。 This research take the recycled newspaper as material. According to the process of pulp producing, deinking, hot pressing and make the fiber board. By changing the density of the fiber board, we discuss the mechanical properties and the best forming conditions. The result indicated that when the density of fiber board is over 0.6, the sample has better molding ability and the mechanical properties are also become stable. According to the increasing of density, the mechanical properties of the sample are also incresing. But the absorbability and connonation of water are decreasing.
關聯:	華岡紡織期刊 5:4 民87.12 頁309-315
显示于类别:	[紡織工程學系] 學報-華岡紡織期刊

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	73	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....