細丹尼聚酯織物經混合鹼劑防拔染加工其拔染性及物性之探討

CCUR > College of Natural Science and Engineering > College of Engineering > Department of Textile Engineering > Journal of the Hwa Gang Textile > Item 987654321/36892

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/36892

Title:	細丹尼聚酯織物經混合鹼劑防拔染加工其拔染性及物性之探討
Authors:	廖大裕王權泉
Contributors:	紡工系
Keywords:	細丹尼聚酯織物鹼防拔染減量作用 Fine denier polyester fabric Reduction of weight Alkali discharge resist printing
Date:	1994-03
Issue Date:	2017-07-25 14:00:26 (UTC+8)
Abstract:	本實驗乃針對細丹尼聚酯織物以ICI dispersal Navy 5R-PC羧酸酯基型為底色染料，並經wet on wet及H.P.S.過程進行熱處理行鹼防拔染性及織物強力之影響。由實驗結果得知，以混合鹼劑經wet on wet及HPS的加工方式對拔染性之改善並不顯著。若有強鹼存在時，反而會使織物減量作用增大，造成強力下降，因此，經wet on wet及HPS流程行鹼防拔染加工時，以使用Na2CO3作為鹼拔染劑較佳。 The fine denier polyester fabric was printed by ICI dispersol Navy 5R-PC dyestuff and then using alkali agent for resist-discharge with wet on wet and H.P.S. processes, the effect of mixing ratio of alkali agent on resist-discharge and physical properties of fabric had been extensively studied. Based on experimental results, when strong base was used, the resis-dischargeablity and strength of fabrics decreased, and the reduction of weight of fabric increased with base. The Na2CO3 as agent for resist-discharge printing could obtain the effective results and keep good physical properties of fabrics.
Relation:	華岡紡織期刊 1:1 民83.03 頁71-75
Appears in Collections:	[Department of Textile Engineering ] Journal of the Hwa Gang Textile

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	114	View/Open

View Licence

Loading...