| 摘要: | 本實驗主要係將防燃聚酯織物Trevira CS經不同撥水撥油劑處理，並改變撥水、撥油劑之濃度、加工時間及溫度等條件，以探討加工後之防燃聚酯織物其撥水撥油性、防燃性、物性以及耐用性之變化。由實驗得知，撥水撥油劑的濃度、加工溫度及時間皆會影響加工物之處理效果；當撥水撥油劑濃度約3%時，加工物即可獲得良好之撥水撥油性，同時熱處理溫度以不超過160℃為宜；一般撥水撥油加工皆會使防燃聚酯織物之防燃性下降，至於耐用性則以氟素系撥水撥油劑為佳。
The effect of concentration of water & oil repellent agents and finishing conditions on the water & oil repellence and flame-resistance of trevira CS fabric is studied. The experimental results show that wax and silicone compound agents give no oil repellence the fabric, but provide it with water repellence, Flouor chemical finish can give the fabric both properties. In addition generally, water & oil repellent finish will make the flame resistance of Trevira CS fabric significantly decrease when the cincentration is above 3%. |
