廢棄物回收再製廢纖板之可行性研究

CCUR > College of Natural Science and Engineering > College of Engineering > Department of Textile Engineering > Journal of the Hwa Gang Textile > Item 987654321/36745

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/36745

Title:	廢棄物回收再製廢纖板之可行性研究 Feasibility of Junk Fiber Plank Regenerated Using the Recycled Waste Material of Industry
Authors:	李文仁李貴琪
Contributors:	紡工系
Keywords:	廢纖維聚丙烯混棉梳棉熱壓 Waste fabric Polypropylene Mixed fibre Carding Hot press
Date:	1997-09
Issue Date:	2017-07-06 14:03:19 (UTC+8)
Abstract:	本研究係採廢纖維為強化材，以熱可塑性聚丙烯纖維為基材，依強化材和基材之重量百分比70:30，經由開混棉、梳棉及熱壓等工程製成廢纖板，藉著改變成形條件，來探討複合材之合浸效果、機械性質及其最佳成形條件。由實驗結果得知其最佳成形時間4min、成形壓力40kgf/cm□、成形溫度200℃。 The thermoplastic polypropylene was used as the matrix mixing and carding waste fiber m this study. The weight percentage ratio of combination of the reinforced material and matrix is 70:30. The waste fiber wood was used to form the mixing, carding and hot press sample. The immersion effect, their mechanical properties and the best treatment conditions of the thermoplastic composite material were studied. The results indicate that the best treatment conditions of 10 minutes 40kgf/cm□ and 200℃ can be found.
Relation:	華岡紡織期刊 4:3 民86.09 頁233-241
Appears in Collections:	[Department of Textile Engineering ] Journal of the Hwa Gang Textile

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	139	View/Open

View Licence