文化大學機構典藏 CCUR:Item 987654321/36352
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 47249/51115 (92%)
造访人次 : 14404667      在线人数 : 236
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻
    主页登入上传说明关于CCUR管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/36352


    题名: 熔噴複合活性碳纖維不織布過濾性能研究
    The Study of Filtration Function of Meltblown Composite Nonwoven with Activated Carbon Fiber
    作者: 彭兆群
    吳元順
    贡献者: 紡工系
    关键词: 熔噴
    活性碳纖維
    Meltblown
    Activated Carbon
    日期: 2016-04
    上传时间: 2017-06-27 11:09:40 (UTC+8)
    摘要: 由於纖維狀材料具有高粉塵微粒過濾效率及低壓損的特性,而被廣泛地用在過濾基材上。顆粒狀或纖維狀的活性碳也常被複合於過濾基材內,為了增加化學分子及臭氣等吸附性能,然而活性碳複合技術同時影響到活性碳被握持之固著能力及吸附效能。用樹脂混合活性碳顆粒,然後將過濾基材含浸,是一般將活性碳顆粒複合於過濾基材的技術,但由於活性碳表面孔隙被樹脂覆蓋大部份,進而大幅降低吸附效能。本文係將熔噴不織布與纖維狀活性碳混合的新製程。以纖維狀活性碳之混合比率(15%, 30%及45%)為此製程之變數。此製程中,係使用自行設計、連續式之設備而且以物理性質、氣體吸附量及過濾效率做不同比率纖維狀活性碳及含浸活性碳濾布之比較。
    Fibrous materials are widely used for filter media because of their high particle filtration efficiency (FE) and low-pressure drop. Activated carbon particles or fibers are frequently inserted into the filter media for adding the adsorption ability to odours and chemical vapors. However, the insertion techniques affect the holding capability of the activated carbon materials in the substrate fibers and therefore the application of the composite, as well as the adsorption ability. Mixing of latex with the carbon particles and then dipping of the mixture with the filter media is a very common technique to insert the carbon particles into the filter media. However, the adsorption strength of the carbon particles is reduced by the coverage of latex on the meso-pores of the carbon particles. This project uses three different weight ratios, viz., 15%, 30% and 45%, of activated carbon fibers (ACF) embedded into the meltblowing PP fiber stream to make the filter composite on the meltblowing line. The FE and the chemical vapor adsorption ability in terms of break-through and saturation times of these composites of activated carbon fibers as well as the latex-dipped composite of carbon particles will be presented. The carbon fiber insertion processes and the experimental results will be discussed.
    關聯: 華岡紡織期刊 ; 23卷3期 (2016 / 04 / 01) , P160 - 164
    显示于类别:[紡織工程學系] 學報-華岡紡織期刊

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML256检视/开启


    在CCUR中所有的数据项都受到原著作权保护.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈