文化大學機構典藏 CCUR:Item 987654321/36160
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 47249/51115 (92%)
造訪人次 : 14016483      線上人數 : 247
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/36160


    題名: 幾丁聚醣複合材料應用於哺乳動物細胞培養固定化探討
    Immobilization of Chitosan Composite Material Used in Mammalian Cells Culture
    作者: 謝明孝
    吳韻玲
    徐郁文
    林宏軒
    張志鵬
    劉裕國
    貢獻者: 紡工系
    關鍵詞: 幾丁聚醣
    海藻酸鈉
    M.T.T
    聚電解質
    細胞固定化
    Immobilization
    Chitosan
    Mammalian Cells
    日期: 2011-02
    上傳時間: 2017-06-14 13:13:36 (UTC+8)
    摘要: 本研究目的係探討幾丁聚醣/海藻酸鈉複合材料掺合明膠、及掺合氧化鋁與明膠後,對於動物細胞固定化之培養活性的影響;以作為日後發展桿狀病毒/哺乳動物細胞生物反應器固定化載體用途之評估。在此研究中探討了複合材料在不同酸鹼值下的吸水率、體外酵素降解率、材料混合後之官能基變化以及動物細胞固定化後的活性值。結果顯示,複合材料掺合明膠後吸水率較未掺合明膠平均上升150%;體外酵素降解率平均上升8.33%;細胞活性值平均上升了0.17。選擇活性較高的明膠組來掺合氧化鋁,其結果發現細胞活性值較未掺合氧化鋁者平均上升了0.21;將複合材料製作為疊層化的聚電解質之後發現,製作成三層複合材料的細胞活性值較未分層平均上升了0.15,製作為六層複合材料的細胞活性值較未分層平均上升了0.41。將CHO-K1細胞固定化在掺合氧化鋁的幾丁聚醣/海藻酸鈉/明膠複合薄膜,其平均生長活性為1.979、Vero細胞平均生長活性為1.828、U20S細胞平均生長活性則為1.64。
    In this study, we discussed immobilized activity of the material which admix Chitosan , Sodium Alginate, Gelatin and Aluminum oxide. for the animal cells culture. We compared the absorbent rate of the material at the different pH values, the rate of enzymatic degradation in vitro, the functional group changed after the three kinds of materials admixed and the average value which activity of immobilized for the animal cells culture. The result shows, the absorbent rate of the material which admix Gelatin was 1.5 fold higher than the control. The enzymatic degradation rate of the material which admix Gelatin was 8.33% higher than the control in vitro. For the animal cells culture, the average values of immobilized activity which admix Gelatin was 0.17 higher than the control. When the material admix gelatin and aluminum oxide, the average values of immobilized activity was 0.21 higher than the control. The construction of material was layer by layer, the average values of immobilized activity was 0.15% higher than the control. When the construction of material was six layers, the average values of immobilized activity was 0.41 higher than the control.
    關聯: 華岡紡織期刊 ; 18卷1期 (2011 / 02 / 01) , P41 - 47
    顯示於類別:[紡織工程學系] 學報-華岡紡織期刊

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML100檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋