文化大學機構典藏 CCUR:Item 987654321/3464
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 47249/51115 (92%)
造访人次 : 14172571      在线人数 : 767
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻
    主页 ‧ 登入 ‧ 上传 ‧ 说明 ‧ 关于CCUR ‧ 管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/3464


    题名: Optimum injection molding processing condition on EMI shielding effectiveness of stainless steel fiber filled polycarbonate composite
    作者: 陳為仁;陳俊生;陳夏宗;簡仁德
    贡献者: 機械系
    日期: 2008-07-01
    上传时间: 2010-06-10
    摘要: Polycarbonate (PC) polymers mixed with conductive stainless steel fiber (SSF) is injection-molded under various injection process conditions. The composite formed is then tested for its capability to shield off electromagnetic field passing through. The effects of four major injection processing parameters including melt temperature, mold temperature, injection velocity and packing pressure on the electromagnetic interference (EMI) shielding effectiveness (SE) of PC filled with conductive SSF have been investigated. Taguchi method is adopted to obtain the optimum set of injection process parameters to acquire the maximum EMI shielding. It is observed that melt temperature and packing pressure significantly affect shielding effectiveness performance for injection-molded PC composites with SSF filler.
    關聯: International Communications in Heat and Mass Transfer Volume 35 Issue 6 P.744-749
    显示于类别:[機械工程系暨機械工程學系數位機電研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbText2418检视/开启


    在CCUR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈