聚酯／尼龍66梭織物經微波照射處理其接觸角及微細構造影響之研究

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 學報-華岡紡織期刊 > Item 987654321/3145

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/3145

题名:	聚酯／尼龍66梭織物經微波照射處理其接觸角及微細構造影響之研究 The Study on Contact Angle and the Micro Structure of PET/Nylon66 Fabric by Microwave Irradiation
作者:	袁庭湘陳銘進吳明杰邢文灝
贡献者:	紡工系
关键词:	微波照射接觸角表面處理
日期:	2006-12-01
上传时间:	2010-05-13 10:10:00 (UTC+8)
摘要:	本研究係將聚酯／尼龍66梭織物以不同微波能量處理，以提昇基布對藥劑的吸附能力，藉由甘油、聚四級銨與聚酯／尼龍66梭識物表面間的角度變化探討其吸濕性。在電子顯微鏡下可以發現其梭織物隨著微波能量及照射時間的增加，則纖維表面會產生凹陷、空孔的現象，且會隨微波能量及照射時間的增加更為顯著。經由接觸角測試可以得知以490W60S為例，經5.2秒後其對於甘油、聚四級銨接觸角度分別為32.6、47.6，相較於未經微波照射處理之聚酯／尼龍66梭織物的43.8、65.7有明顯的下降，證明聚酯／尼龍66梭織物經微波照射後產生空孔對藥劑吸附的能力提升。 This study changed is used different microwave energy deal with the PET/ Nylon66 fabric, promote the fabric ability of absorbing to the medicament. From glycerol, polyquatemium-7 and PET/Nylon66 fabric contact angle change calculate to discuss it wetting effect. Can be found under the electron microscope, when microwave energy and irradiation are increase, the phenomenon of empty hole of fibre is more obvious, among them have the greatest difference with 490 W60S and Through microwave treatment fabric. Test and find from contact angle, take 490W60S as an example, the glycerol and polyquaternium-7 contact angle respectively is 32.6° and 47.6° after 5.2 seconds, decline obviously more than 43.8, 65.7 of the fibre without irradiating through microwave treatment. PET/Nylon66 fabric which indirectly proves that the dents produced after microwave irradiate will increase the absorption.
關聯:	華岡紡織期刊 13卷4期 P.348-357
显示于类别:	[紡織工程學系] 學報-華岡紡織期刊

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	Text	284	检视/开启

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....