微波處理聚酯梭織物表面對其濕潤性質之研究

CCUR > College of Natural Science and Engineering > College of Engineering > Department of Textile Engineering > Journal of the Hwa Gang Textile > Item 987654321/3142

Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/3142

Title:	微波處理聚酯梭織物表面對其濕潤性質之研究
Authors:	林明正吳明杰邢文灝黄郁傑
Contributors:	紡工系
Keywords:	微波接觸角表面處理濕潤性
Date:	2007-06-01
Issue Date:	2010-05-13 09:56:39 (UTC+8)
Abstract:	本研究係将聚酯梭織物以不同微波能量處理，藉由擷取甘油滴定梭織物産生之接觸角、梭織物吸附溶液之擴散面積、回潮率等測試來探討微波處理後對於聚酯梭織物的濕潤性，並了解聚酯梭織物的表面濕潤性質是否對梭織物複合性有影響性。研究結果得知，以濕式微波處理450W時效果最佳，原本未處理的吸附時間超過12秒，濕式微波處理450W時可縮短至11秒，但由剝離強力可觀察出，濕式微波處理900W時，布與布及布與膠層間剝離強力提升最高，分別提升11.7%、21.6%。 In the study, we used the glycerol to measure the PET fabric properties by treating the different microwave energy, such as the contact angle, the fabric surface wettability, the diffuse area, and the moisture regain. We expect to know the properties and compatibility of fabric when we measured the surface wettability of fabric. The fabric without microwave irradiates spend more than 12 sec, but the results show that the best effect of watery microwave irradiates is 450W, and the fabric absorbent time will go down to 11 sec. Further more, when the watery microwave irradiates is 900W, the adhesion of fabric to fabric or fabric to rubber will rise to 11.7% and 21.6%.
Relation:	華岡紡織期刊 14卷2期 P.141-150
Appears in Collections:	[Department of Textile Engineering ] Journal of the Hwa Gang Textile

Files in This Item:

File	Description	Size	Format
index.html		0Kb	Text	291	View/Open

Loading...