文化大學機構典藏 CCUR:Item 987654321/30867
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 46962/50828 (92%)
造访人次 : 12458813      在线人数 : 551
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻
    主页 ‧ 登入 ‧ 上传 ‧ 说明 ‧ 关于CCUR ‧ 管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/30867


    题名: Effect of Clay Types on the Properties of Si lane Compatibilzied Metallocene Polyethylene/Clay Nanocomposites
    作者: Chen, W.-C.
    Lai, S.-M.
    Yang, Chen-Hau
    Tang, Shi-Xian
    Liao, Zong-Ching
    贡献者: Dept Chem Engn
    关键词: Metallocene polyethylene
    Clay
    Nanocomposite
    Moisture crosslinking
    日期: 2015
    上传时间: 2015-11-03 16:18:06 (UTC+8)
    摘要: The interaction between the intercalant within clay and the compatibilizer is essential to the properties of nanocomposites, and the compatibilizer properties are often neglected. In this work, we have deliberately used a low crystallinity polyolefin elastomer as a compatibilizer to investigate if the inferior mechanical properties of the compatibilizer compared with those of the matrix would counteract the effects of high dispersion of clay in the mPE/clay systems. Melt-mixed mPE (metallocene polyethylene)/clay nanocomposites were thus prepared using a low-crystallinity polyolefin elastomer (mPE-g-silane) as a compatibilizer under two different types of commercial clay (Cloisite 20A and 30B) with different organic affinities to mPE-g-silane, to investigate both intercalant and compatibilizer effects. According to X-ray diffraction and transmission electron microscopy analyses, all 20A-filled nanocomposites showed fairly well-dispersed clay within the mPE matrix in comparison with 30B-filled cases due to a larger d-spacing of 20A for easier access of the compatibilizer, even though a higher affinity between 30B and the compatibilizer was expected. Measurable gel content was observed for 20A-filled systems, but not for 30B-filled systems. Tensile properties and tear strength of 20A-filled samples were higher than those of 30B-filled samples, again due to the high dispersion effect in 20A-filled samples. Thus, the affinity of 20A clay with silane agent was quite essential for these compatibilized mPE/clay systems, despite of the weak mechanical properties of the compatibilizer. Clearly, a subtle balance of the interfacial interaction, interface properties and clay dispersion is essential to attain the good mechanical properties of mPE/clay nanocomposites.
    關聯: POLYMERS & POLYMER COMPOSITES 卷: 23 期: 7 頁碼: 451-460
    显示于类别:[化學工程與材料工程學系暨碩士班] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML538检视/开启


    检视Licence
    检视Licence

    在CCUR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈