文化大學機構典藏 CCUR:Item 987654321/2930
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 47249/51115 (92%)
造訪人次 : 14019672      線上人數 : 328
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於CCUR ‧ 管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2930


    題名: Electrical and impact properties of the hybrid knitted inlaid fabric reinforced polypropylene composites
    作者: Cheng K.B.
    Lee K.C.
    Ueng T.H.
    Mou K.J.
    貢獻者: 紡工系
    關鍵詞: electrical properties
    compression moulding
    knitting
    thermoplastic resin
    electromagnetic shielding effectiveness (EMSE)
    日期: 2002
    上傳時間: 2009-12-04 14:43:36 (UTC+8)
    摘要: A range of conductive knitted fabric reinforced polypropylene composites have been developed and their electromagnetic shielding effectiveness (EMSE), electrostatic discharge (ESD) and impact properties have been investigated. Carbon and aramid fibers are used as the reinforcement phase in the composites, while copper and stainless steel wires are incorporated as conductive fillers to provide the ESD and EMSE properties of the composite materials. The hollow spindle spinning system has been used to make SS/PP, Cu/PP, SS/C/PP, Cu/C/PP and Cu/K/PP uncommingled yams. The double plain knitted fabric and its inlaid fabrics were fabricated from the yarns using a 5G traverse knitted machine. Changing the yam composition, fabric knit structure, and stitch density varies the amount of copper and stainless steel conductive fillers in the composites. 4 layer cross-ply laminates were laid-up by hand, then formed into 3-min thick conductive thermoplastic composites using a compression molding. It was observed that the EMSE and ESD of the composites increase with increasing the incident frequency, especially at higher frequency range. The effects of inlaid ends, materials and yam constitutions on the EMSE of the conductive thermoplastic composites were investigated. The results indicate that the composites can be used for the purpose of electromagnetic shielding and ESD attenuation, as well as for some microwave applications. (C) 2002 Elsevier Science Ltd. All rights reserved.
    關聯: COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING Volume: 33 Issue: 9 Pages: 1219-1226
    顯示於類別:[紡織工程學系] 期刊論文

    文件中的檔案:

    沒有與此文件相關的檔案.



    在CCUR中所有的資料項目都受到原著作權保護.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋