文化大學機構典藏 CCUR:Item 987654321/28829
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 46962/50828 (92%)
造访人次 : 12455415      在线人数 : 584
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻
    主页登入上传说明关于CCUR管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/28829


    题名: 玻璃纖維強化聚丙烯不織布複合材料物性之研究
    Mechanical Properties of Glass-Fiber Reinforcing Polypropylene Nonwoven Compsite Material
    作者: 李貴棋
    牟雋月
    陳美子
    謝佑陽
    贡献者: 華岡工程學報
    日期: 1995-07
    上传时间: 2014-11-04 16:28:02 (UTC+8)
    摘要: 近年來由於科技文明之快速發展,消費者對材料品質之需求日益嚴格,致使部份的傳統性材料已逐漸不符合市場之需求,首要之務即在發展質輕、強度高、彈性佳之複合材料;纖維複合材料即是在此種強勢需求下,愈來愈被重視。但是由於熱硬化型複合材料對環境污染之故,在全球環保意識逐漸抬頭、貿易保護主義抬頭與纖維原料價格逐漸哄抬之際,複合材料製品的回收及再生利用已引起廣泛的重視,因而回收再生的熱可塑型複合材料,將逐步取代不易回收之熱硬化型複合材料,實乃未來之趨勢。本論文採用熱可塑型聚丙烯不織布爲基材,配合強化材玻璃纖維蓆製成熱可塑型預浸材之中間材料,強化材和基材之重量百分比爲70:30,並利用熱壓成型法製成積層板。經由變化成型條件:時間、溫度、壓力,以探討成型條件對含浸效果及複合材料之抗拉性質所造成之影響。藉由積層板的力學分析以明瞭玻璃纖維強化熱可塑型複合材料的最佳成型條件。
    Owing to the technological progress, high quality of material has been severely demanded nowadays. Part of conventional material can no longer match up to the market; therefore, fiber composite material is considerably regarded under the mass market need. To prevent the environmental pollution, the recollection and recycling of composite material products have drawn world wide attention, so the recyclable FRTP will replace the FRP, which is not casily recycled.
    In this paper, the FRTP polypropylene nonwovens was selected as the matrix and coordinated with the reinforced material glass fiber mat, which could be medial material of thermoplastic prepreg. The weight percentage of reinforced material and matrix is 70:30. The laminations were thirmoformed. Through mechanical analysis of laminaation, we could find the best process conditions of the glass fiber reinforcing thermoplastic composite materials.
    By changing the process conditions: time, time, temperature and pressure, we could find the influences on mechanical propertied of composite materals and the effects of impregnation in this paper.
    關聯: 華岡工程學報 ; 9 期 (1995 / 07 / 01) , P293 - 309
    显示于类别:[工學院] 學報-華岡工程學報

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML145检视/开启


    在CCUR中所有的数据项都受到原著作权保护.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈