文化大學機構典藏 CCUR:Item 987654321/28700
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 47249/51115 (92%)
Visitors : 14091561      Online Users : 340
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
    •  Adv. Search
    Home ‧ Login ‧ Upload ‧ Help ‧ About ‧ Administer Goto mobile version


    Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/28700


    Title: 以網狀格線量測應變驗證試片中央類橢圓孔前端之彈性－彈塑性應力轉換
    Verification of the Conversion of Elastic to Elastic-plastic Stresses in front of a Central, Quasi-elliptical Hole with the Strain Measurement Using a Network Grid
    Authors: 陳文璟
    陳金冠
    Contributors: 華岡工程學報
    Keywords: 能量守恆法則
    彈性應力分佈
    彈塑性應力分佈
    以網狀格線量測得之應力分佈
    conservation of strain-energy
    elastic stress distribution
    elastic-plastic stress profile
    the measured stress distribution using a network grid
    Date: 2010-06
    Issue Date: 2014-10-31 10:44:28 (UTC+8)
    Abstract: 本文應用貼紙格線／數位相機／影像處理軟體，量測試片中央類橢圓孔前端之應力分佈；來驗證以能量守恆法則，從彈性應力轉換而成之彈塑性應力之精確性。本文先應用能量守恆法則，推導出彈性-彈塑性應力之轉換公式。再進一步將試片中央類橢圓孔前端應力集中放大部位內，由彈性應力分佈公式計算得之彈性應力，轉換成彈塑性應力。吾人發現：與先前論文針對具有中央圓孔之試片所得結果類似，轉換計算之彈塑性應力，較量測應力略小。
    We verified the conversion of the elastic to the elastic-plastic stress profile in front of a quasi-elliptical notch on the basis of strain-energy conservation, with the strain measurement using a network grid, digital camera and image-handling software. First, we derived a formula to convert an elastic stress to an elastic-plastic stress based on the conservation of strain-energy. Then, we calculated the elastic-plastic stresses in front of the quasi-elliptical notch from the elastic-stress distribution derived from a published formula. Comparing with the measured stress distribution using the grid-tab/digital camera/image-handling software technique, such calculated elastic-plastic stress profile is a little bit lower than the measured stress profile. The results agree well with the previous conclusions we obtained for the central-circular notch.
    Relation: 華岡工程學報 ； 26 期 (2010 / 06 / 01) ， P9 - 17
    Appears in Collections:[College of Engineering] Chinese Culture University Hwa Kang Journal of Engineering

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML126View/Open


    View Licence

    All items in CCUR are protected by copyright, with all rights reserved.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback