文化大學機構典藏 CCUR:Item 987654321/2748
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 47249/51115 (92%)
造訪人次 : 14013485      線上人數 : 298
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於CCUR ‧ 管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2748


    題名: The formation and water content of synthetic fiber growing media
    作者: Chang, Chih Pong
    Hsu, Che Chang
    貢獻者: 紡工系
    關鍵詞: culture medium
    fiber group
    formation
    water content
    日期: 2006
    上傳時間: 2009-11-20 11:15:03 (UTC+8)
    摘要: The research is to utilize synthetic fibers to manufacture new growing media with uncomplicated adjustment of water availability and air capacity. Using polyethylene terephthalate (PET), polyamide (Nylon66) and polypropylene (PP) as the raw materials; utilizing their excellent then-no-plasticity to cure above the glass-transition temperature, using different ratio of fibers to produce growing media of different bulk densities. The formation characteristics of these growing media are required in plants cultivation were discussed. Compare the results with rockwool growing media that are commonly used at present days. The results indicated that PET, Nylon66 and PP fibers could obtain good formation characteristics in 0.026-0.076, 0.054-0.162, 0.055-0.157 g/cm(3), respectively. Among them the culture media that uses PET as raw material, for its excellent stiffness and thermo-plasticity, produces the best formation characteristics. PET under the aforementioned bulk densities could have above 90% total porosity, above 10% air capacity, above 40% water availability and above 1200% water content, which conforms to the common plant culture habitat conditions. Its performance well surpasses the rockwool growing media. If we adjust with different ratio of fine denier fiber in the PET fiber growing media, then the water content of the media may be enhanced up to 20%. (c) 2006 Published by Elsevier B.V.
    關聯: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 433 Issue: 1-2 Pages: 100-103
    顯示於類別:[紡織工程學系] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbText923檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋