Fabrication of conductive woven fabric and analysis of electromagnetic shielding via measurement and empirical equation

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 期刊論文 > Item 987654321/2637

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2637

题名:	Fabrication of conductive woven fabric and analysis of electromagnetic shielding via measurement and empirical equation
作者:	Chen, H. C. Lee, K. C. Lin, J. H. Koch, A.
贡献者:	紡工系
关键词:	copper wire stainless steel wire shielding effectiveness
日期:	2007
上传时间:	2009-11-11 11:09:37 (UTC+8)
摘要:	Copper wire and polyamide filaments used as core yam were wrapped with polypropylene filaments. Identical yarn was utilized for warp and weft to obtain isotropic shielding behavior. Samples were produced with an electronic loom. In the second step, four or six layers of fabric were laminated at various angles in various thicknesses. This study investigates the shielding effectiveness of the various layers of fabric. The screened aperture and wave-transmission-matrix methods were adopted to estimate shielding effectiveness of the fabric and composites and to verify and compare the correlation between measured results and values calculated using empirical equations. (c) 2006 Elsevier B.V. All rights reserved.
關聯:	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Volume: 184 Issue: 1-3 Pages: 124-130
显示于类别:	[紡織工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	Text	937	检视/开启

在CCUR中所有的数据项都受到原著作权保护.