English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 47225/51091 (92%)
造訪人次 : 13983026      線上人數 : 247
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CCUR管理 到手機版


    請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/26346


    題名: 受分佈力梯度功能預扭樑的撓曲變形分析
    Static Bending of Functionally Graded Twisted Beams under Distributed Transverse Loads
    作者: 陳為仁
    貢獻者: 機械系
    關鍵詞: 靜態撓曲
    Timoshenko 樑
    功能梯度材
    扭角
    體積比指標
    static bending
    Timoshenko beam
    functionally graded material
    twist angle
    volume fraction
    日期: 2012-06
    上傳時間: 2013-12-03 13:44:34 (UTC+8)
    摘要: 本文探討受分佈力作用之功能梯度預扭Timoshenko 樑的靜態撓曲變形,功能梯度材料性質假設係以冪次方函數沿著厚度方向連續地變化。文中求出ㄧ懸臂預扭樑受分怖力時撓曲變形的解析解,據以探討扭角、體積比指標、厚度比及剪力變形對預扭樑之靜態撓曲特性的影響。
    Static bending of a functionally graded twisted Timoshenko beam subjected to distributed transverse loads is analyzed. Functionally graded material properties are assumed to be graded continuously across the thickness direction as a power-law of volume fraction of the constituents. The
    analytical solution for the static deflection of cantilever twisted beam is then derived. The effects of the twist angle, volume fraction index, and thickness ratio and shear deformation on the static bending characteristics of twist beams are investigated.
    關聯: 華岡工程學報 n.29 p.137-144
    顯示於類別:[工學院] 學報-華岡工程學報

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML444檢視/開啟
    index.html0KbHTML418檢視/開啟


    在CCUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©  2006-2025  - 回饋