全向輪型機器人之動力與控制

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 機械工程系暨機械工程學系數位機電研究所 > 博碩士論文 > Item 987654321/25418

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/25418

题名:	全向輪型機器人之動力與控制 Dynamics and Control Design of an Omnidirectional Mobile Robot
作者:	溫紳寶 Bao, Nguyen Xuan
贡献者:	機械工程學系數位機電碩士班
关键词:	全向輪型機器人之動力控制 Omnidirectional Mobile Robot Dynamics Sliding Control Fuzzy Control
日期:	2013-06
上传时间:	2013-10-03 13:30:18 (UTC+8)
摘要:	This thesis will start with an explanation of the concept and advantages of omnidirectional mobility. Then, a brief introduction to the omnidirectional mobile platform will be given and hardware characteristics be clarified. Thereafter, the robot kinematics is analyzed to prescribe the robot’s movements in the environment; the dynamics slip model is built which will be used to implement tracking. Base on dynamics model, a path tracking control is design using sliding mode control, fuzzy logic control to make robot follow the desired path with minimal system tracking error. The tracking performance of tracking strategy is evaluated by MATLAB simulation. The experiment for validating the developed method of tracking control is implemented by Digital Signal Processor and experimental results are shown. Finally, summarizes the research results and discusses ideas for future extension of the research.
显示于类别:	[機械工程系暨機械工程學系數位機電研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
fb141205161430.pdf		2699Kb	Adobe PDF	778	检视/开启

检视Licence

在CCUR中所有的数据项都受到原著作权保护.