文化大學機構典藏 CCUR:Item 987654321/24079
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 46962/50828 (92%)
造访人次 : 12457808      在线人数 : 620
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻
    主页 ‧ 登入 ‧ 上传 ‧ 说明 ‧ 关于CCUR ‧ 管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/24079


    题名: The Unidirectional Glass Fiber Reinforced Furfuryl Alcohol for Pultrusion. II. Correlation of Processing Parameters for Optimizing the Process
    作者: Chen, CH (Chen, Chin-Hsing)
    Chen, IK (Chen, I-Ken)
    贡献者: Dept Chem & Mat Engn
    关键词: pultrusion;glass fiber
    furfuryl alcohol
    processing parameters
    composites
    日期: 2011-02-05
    上传时间: 2013-01-25 10:15:34 (UTC+8)
    摘要: Unidirectional glass fiber reinforced furfuryl alcohol (FA) composites have been prepared by the pultrusion processes. The optimum processing parameters of the glass fiber reinforced FA composites by pultrusion has been studied. The effects of the optimum processing parameters on the properties (flexural strength, flexural modulus, notched Izod impact strength, glass transition temperature (T(g)), dynamic shear storage modulus (E'), shrinkage ratio, and roughness) investigated including die temperature, pulling rate, postcure temperature and time, and filler type and content. Results show that the pultruded composites possessed various optimum pulling rates at different die temperatures. On the basis of the DSC diagram, the swelling ratio and the mechanical properties of pultruded composites, the optimum die temperature can be determined. The mechanical properties and T(g) increase at a suitable postcure temperature and time. Furthermore, the properties which decrease due to the degradation of pultruded composites for a long postcure time will be discussed. The mechanical properties of pultruded composites reach a maximum value at various filler content corresponding to the talc and calcium carbonate, respectively, and then decreased. When the fillers are added to the pultruded glass fiber reinforced FA composites, the shrinkage ratio of composites become smaller, and the surface of composites became smooth. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 119: 1788-1796, 2011
    關聯: JOURNAL OF APPLIED POLYMER SCIENCE 卷: 119 期: 3 頁數: 1788-1796
    显示于类别:[化學工程與材料工程學系暨碩士班] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML365检视/开启


    检视Licence

    在CCUR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈