The preparation and properties of compatibilized nylon 6/ABS blends using functionalized polybutadiene. Part 1: Impact properties

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 化學工程與材料工程學系暨碩士班 > 期刊論文 > Item 987654321/2382

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/2382

题名:	The preparation and properties of compatibilized nylon 6/ABS blends using functionalized polybutadiene. Part 1: Impact properties
作者:	Lai, S.M.;Liao, Y.C.;Chen, T.W.
贡献者:	材料科學與奈米科技研究所
日期:	2005
上传时间:	2009-10-30 11:59:28 (UTC+8)
摘要:	The impact behaviors of nanoclay filled nylon 6 (nano-nylon 6) or nylon 6 blended with poly(acrylonitrile-butadiene-styrene) terpolymers (ABS) were investigated here using polybutadiene grafted maleic anhydride (PB-g-MA) as a compatibilizer to enhance interphase interaction. It is found that impact strength increases slightly for nanonylon 6/ABS blend system with the addition of compatibilizer at various ABS compositions, but increases to a certain degree for nylon 6/ABS case. Similar effects are also found with decreasing test temperature, especially at a blend composition of 80/20. These discrepancies are attributed to a different degree of available reaction sites from amine group on nano-nylon 6 and nylon 6 as well as the rigidity of clay in deteriorating toughness. As for thermal properties, the heat distortion temperature shows marginally decrease in the nano-nylon 6/ABS blend. Through morphology observations, the etched ABS particle sizes tend to decrease with the additions of compatibilizer for both blends, but are larger with higher contents of ABS concentrations. Those observations account for impact behaviors of the investigated blends.
關聯:	POLYMER ENGINEERING AND SCIENCE v.45 n.11 Pages: 1461-1470
显示于类别:	[化學工程與材料工程學系暨碩士班] 期刊論文

文件中的档案:

没有与此文件相关的档案.

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....