生物可分解性紙漿發泡材之成形性與其緩衝性之研究

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 學報-華岡紡織期刊 > Item 987654321/22494

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/22494

题名:	生物可分解性紙漿發泡材之成形性與其緩衝性之研究 Study of Biodegradable Material Forming of Pulp Formation and Impact
作者:	林家馴；龍韻存；巢育誠；林晉凱；林佳弘；張志鵬
贡献者:	紡工系
关键词:	生物可分解紙漿成形性緩衝材加熱發泡 biodegradable pulp formation buffer heating blow
日期:	2009-12-01
上传时间:	2012-05-16 13:58:11 (UTC+8)
摘要:	本研究主要就生物可分解性紙漿發泡材之成形性及其緩衝性之探討。利用回收紙漿做為發泡基材，以PVA水溶液當作黏合與發泡劑，混合不同比例的紙漿與PVA水溶液，利用加熱發泡方式，製成具有緩衝性之發泡材，觀察其發泡材之斷面形態與含水量及其衝擊所吸收的能量關係，找出最佳成形條件。實驗結果顯示，60～70g的PVA水溶液與20─30g的紙漿混合，可得到良好的發泡與成形，其中以65gPVA水溶液與25g紙漿混合之含水量與緩衝性分別能達到793 . 7％及289N。 In this study, the formation and the impact properties of the cellulose material forming of pulp. The recycled cardboard boxes are used as the blowing material, which mixed with appropriate ratio of PVA solution and blown by heating foaming method to produce the porous structure material without any blowing agent added. Under this investigation, the relationship of cross section, water content, and impact absorbability were observed, in order to find the best condition of formation. The results indicated that the best condition is 60-70g PVA solution and 20-30g pulp material can produce the foaming material, among them mixed by the 65g PVA solution and 25g pulp can reach the best water content and impact absorbability of 793.7% and 289 N respectively.
關聯:	華岡紡織期刊 16卷4期 P.100-105
显示于类别:	[紡織工程學系] 學報-華岡紡織期刊

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	221	检视/开启

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....