利用電化學法加速模擬體液誘導PLA纖維表面生成氫氧基磷灰石之研究

文化大學機構典藏 CCUR > 理工學院 > 工學院 > 紡織工程學系 > 學報-華岡紡織期刊 > Item 987654321/22461

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://irlib.pccu.edu.tw/handle/987654321/22461

题名:	利用電化學法加速模擬體液誘導PLA纖維表面生成氫氧基磷灰石之研究 A Study of Electrochemical Method to Accelerate the use of Simulated Body Fluid Induced Hydroxyapatite Deposition on thePLA Fiber Surface
作者:	羅濟生；何智閎；邢文顯；樓靜文；陳悅生；林佳弘
贡献者:	紡工系
关键词:	聚乳酸氫氧基磷灰石模擬體液電化學法 polylactic acid (PLA) hydroxyapatite (HA) simulated body fluid (SBF) electrochemical
日期:	2010-06-01
上传时间:	2012-05-16 11:08:10 (UTC+8)
摘要:	本實驗利用16錠編帶機將聚乳酸（PLA）複絲製備成聚乳酸編織物，對其進行鹼處理達表面粗糙化，之後將聚乳酸編織物浸置於電鍍液（模擬體液）中，並固定於陰極電極上，施以固定電流和不同時間來加速氫氧基磷灰石（HA）的生成，其後再將電化學處理後之樣品分別浸泡於模擬體液中1天、3天、5天。最後利用掃描式電子顯微鏡觀察表面形態、X光繞射儀進行結晶繞射分析與傅立葉轉換紅外光譜儀進行光譜分析。由實驗結果得知在電化學處理30分鐘時即有氫氧基磷灰石之生成，又在電化學處理30分鐘後浸泡模擬體液１天時，得到類似文獻中單純浸泡模擬體液15天之HA型態。 In this study, the polylactic acid (PLA) fibers were braided by a 16-spindle braid machine, and increased PLA fibers surface rough of alkali treatment. After that, the PLA braiding soaked in simulated body fluid and fixed to the cathode electrode, and entered into stationary current and different times to speed up the hydroxyapatite (HA) deposition. After the sample of electrochemical treatment were immersed in simulated body fluid in 1day, 3days, and 5days. Using Scanning Electron Microscope (SEM) observed surface morphology, X-ray diffiaction (XDR) for crystal diffiaction analysis and Fourier transform in infrared spectrometer (FTIR) for spectrum analysis. Hydroxyapatite was generated by electrochemical treatrnent for 30 minutes In the electrochemical treatrnent for 30 minutes then immersed in simulated body fluid in 1 day, in the result of the HA type is similar to reference by immersed in simulated body fluid in 15days.
關聯:	華岡紡織期刊 17卷2期 P.54-62
显示于类别:	[紡織工程學系] 學報-華岡紡織期刊

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	295	检视/开启

在CCUR中所有的数据项都受到原著作权保护.

数据加载中.....