文化大學機構典藏 CCUR:Item 987654321/22234
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 46962/50828 (92%)
Visitors : 12460477      Online Users : 611
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: https://irlib.pccu.edu.tw/handle/987654321/22234


    Title: 以化學接枝改質聚丙烯纖維對染色性及物性影響之研究
    Authors: 王權泉
    李宗星
    陳博洋
    Contributors: 工學院
    Keywords: 聚丙烯纖維
    甲基丙烯酸甲酯
    接枝
    染著量
    染色性
    methyl methacrylic acid
    graft
    polypropylene
    dye uptake
    dyeability
    Date: 2002-06-01
    Issue Date: 2012-05-09 15:26:43 (UTC+8)
    Abstract: 本研究主要係以過氧化二苯甲醯爲化學起始劑,甲基丙烯酸甲酯爲單體,與聚丙烯纖維行接枝共聚合反應,實驗中主要改變起始劑濃度、單體濃度、接枝溫度及接枝時間等條件進行加工,最後再以鹽基性染料進行染色。以探討聚丙烯纖維經不同接枝條件處理後之接枝率、物性(強力、回潮率)、染色性(K/S、染色牢度、染著量)、SEM表觀分析、FTIR定陸分析及TGA熱裂解分析。由實驗結果得知,聚丙烯纖維經不同接枝條件處理後,以起始劑濃度爲6.19×10^(-3)M、單體濃度3×10^(-1)M及接枝溫度80℃時可得較高的接枝率,且接枝率隨反應時間的增加而提升。在物性方面,經接枝後纖維回潮率及染色性皆有提升,但強力呈輕微下降,其中以低接枝率時之效果較顯著。另纖維經接枝後其熱穩定性呈輕微下降現象。

    In this study, graft polymerization of methyl methacrylate to polypropylene fibers using benzoyl peroxide as a chemical initiator have been investigated. The effect of initiator and monomer concentrations, reaction time, and temperature on the dyeability and physical properties of polypropylene were studied. Grafting yield was increased with increasing initiator concentration up to 6.19×l0^(-3)M and then decreased, the same result for methyl methacrylate grafting on polypropylene fiber that increased with an increase in the methyl methacrylate concentration until the concentration reaches 3×l0^(-1)M. The grafting temperature have effect on grafting yield, when temperature is higher or lower will be as a result of lower grafting yield, the optimal temperature for grafting is about 80℃. Moreover, the moisture regain and K/S all obviously increase with grafting yield, but the strength and degradation temperature of grafted fiber were decreased. Scanning electron microscopy (SEM) revealed that the graft copolymer on surface of polypropylene fiber increased with an increasing grafting yield.
    Relation: 華岡工程學報 16期 p.237 -257
    Appears in Collections:[College of Engineering] Chinese Culture University Hwa Kang Journal of Engineering

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML355View/Open


    All items in CCUR are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback